Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

cherry/curly maple side table hand tool only *LINK*

Posts

cherry/curly maple side table hand tool only *LINK*

#1

cherry/curly maple side table hand tool only *LINK*

Rob Millard

>I made this table as a demonstration piece, while teaching a woodworking class at a local living history farm (see Link) The class was created to attract volunteers for the woodworking shop. The table was based on the example shown in the 1980 edition of How to Build Shaker Furniture, by Thomas Moser. I made the top thinner added a molded edge, and tapered the legs on all 4 sides.

I made this table with only hand tools, other than the bandsaw for resawing the top, and the lathe to turn the knob. The class materials were brought to size with power tools as there wasn�t enough time available to do this by hand. Using only hand tools was a first for me, although I use them for a considerable portion of my work, I usually use power tools to do the "heavy lifting".

I have always said that I could more easily make furniture without electricity, than I could without using hand tools, and this proved to be true. The only time electricity would have come in handy was for lighting; it was quite dark in the shop, making precise work difficult. This was also my first foray into teaching, and I should have done better. Part of the problem was the time constraints, but my limited teaching skills were mostly to blame.

The table is cherry with a curly maple drawer front. I used lye to color the cherry and aniline dye for the drawer front . The drawer front was oiled and top coated with de-waxed dark shellac. The cherry was top coated with orange shellac.

Rob Millard


img

http://www.metroparks.org/_carriageHill/parkOverview.aspx.

Re: cherry/curly maple side table hand tool only *LINK*

#2

Re: cherry/curly maple side table hand tool only

Phil Albany,NY

>Very nice interpretation of Moser's interpretation of the original Shaker table. You're refinements have enhanced the overall design while maintaining the character of the original. Excellent work. Funny, I was looking at his book last night.

Phil

Re: cherry/curly maple side table hand tool only *LINK*

#3

Re: cherry/curly maple side table hand tool only

Pam Niedermayer - Austin, TX

>Beautiful job, Rob. Is that inlay around the top?

Pam

PS BTW, your link would work without the period at the end of it

Re: cherry/curly maple side table hand tool only *LINK*

#4

Re: cherry/curly maple side table hand tool only

Earl Kelly

>Rob, I've always admired your work since seeing it for the first time. I especially admire your hide glue veneering. You make nice pieces that your clients can appreciate and hand down as family heirlooms.

Now that all the gushing is out of the way. Did you surface and or rip out the materials only by hand? Except for the top, which you stated you resawed on the bandsaw. Just thinking about ripping those legs out of 6/4 material with a hand saw makes my shoulder ache.

Re: cherry/curly maple side table hand tool only *LINK*

#5

Well done!

Scott Burr in Ben Lomond,CA

>That table is gracefull and elegant. You did a great job on it.

Re: cherry/curly maple side table hand tool only *LINK*

#6

Re: cherry/curly maple side table hand tool only

Rob Millard

>Earl,

I did rip the legs by hand, but they were only 5/4 stock, so it only took a short time to saw them. I planed the tapers by hand. Normally I would have sawn the tapers on the bandsaw and then removed the saw marks with a plane.

Rob Millard

Re: cherry/curly maple side table hand tool only *LINK*

#7

question

bill tindall

>A very nice table indeed.

Would you discribe the lye coloring process? What concentration? In particular is something done to neutralize it after coloring? I would think that any residual lye would attack shellac, well most coatings, with a vengance.

Re: cherry/curly maple side table hand tool only *LINK*

#8

Re: question

Rob Millard

>I don�t really know what the ratio of water to lye was. I do know that my first solution , was too dark and the second was too light, so in other words experimentation is crucial. The lye is very caustic, but I did not do anything to neutralize it. I just let the wood dry over night and buffed it down with a synthetic abrasive pad, then slapped on some shellac. It has been several years since I�ve used lye, but I still have one piece,made in 1998 and it shows no problems from interaction between the lye and the shellac.

Rob Millard

Re: cherry/curly maple side table hand tool only *LINK*

#9

Re: Another question

Greg B

>Hi Rob,

Superb work, as usual. What timber did you use for the drawer sides? I would assume it would have been a contrast to the curly maple front. Also, do you usually use quarter sawn stuff (for more dimensional stability)?

Cheers,

Greg

Re: cherry/curly maple side table hand tool only *LINK*

#10

Very Nice! Thanks for showing

Frank D. in Montreal

>

Re: cherry/curly maple side table hand tool only *LINK*

#11

Nice job, Rob. Very classic/classy piece.

GolfSteve in Calgary

>

Re: cherry/curly maple side table hand tool only *LINK*

#12

It's very nicely proportioned indeed.

HC Sakman @ Victoria, BC

>

Re: cherry/curly maple side table hand tool only *LINK*

#13

Congrats on the Table and class!

Raymond in Trenton, NJ

>