WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

OT: 3 point wood chippers

Posts

OT: 3 point wood chippers

#1

OT: 3 point wood chippers

Jim in Conowingo, MD

>Hi everyone, I'm a serial lurker and occasional poster. Just wondering if any one might have experience with wood chippers for three point tractor mounts, PTO driven. I'm contemplating buying one, I live in the woods and always have brush piles, small branches from firewood harvesting, etc. to get rid of. I have an old Ford tractor (1954 650) and thought I could put it to warm weather use chopping stuff. I'd only realistically need something that would go up to maybe 4 inches, anything bigger than that is firewood (actually even 4 inches would be firewood, but I don't want to go too underpowered). Thanks in advance for your help.

Re: OT: 3 point wood chippers

#2

PTO driven chippers

Bob Hackett(Mainely,Bob)

>I`d say go for it!

Awhile back my brothers and I spent the better part of a summer cleaning,limbing up,and otherwise tidying my mother`s property.we started with a homeowner chipper,after that burned up we went to roll-off contruction dumpsters(too expensive,although the pics of us jumping up and down on the brush to compact it are priceless).Later we went to borrowing a tow behind chipper and had to drag all the wood to the place it was planted which wore us completely out.

The best approach turned out to be trading an old shaper for the use of a tractor mounted chipper.we could back the tractor down to the scattered piles instead of bringing the piles to the chipper.The chips could be directed exactly where we needed them and the tractor could be used to skid the logs that were too large to chip back up to the road.The PTO chipper had as much or more power than the tow behind and was much safer and easier to use.

I`d look for a model that had a safety stop bar on the hopper as we all agreed this was one of the things we liked best about the unit we had.

One of the other things we liked was that the chipper when dismounted took up far less room than the tow behind.We talked to the owner and found that the purchase price was less than 1/2 that of even a used tow behind of similar horsepower.

Seems like a no-brainer to me.

Be sure and get a LARGE pair of chocks to put under the drive wheels when you park on even slight inclines.Better safe than sorry.

Mainely,Bob

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.