WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Adam,re: PW article

Posts

Adam,re: PW article

#1

Adam,re: PW article

Jack Guzman

>Hi Adam,

After reading your latest Arts and Mysteries article in Popular Woodworking I decided to try to improve my shop lighting.My current system consists of 4'double T-8 fixtures.I have two over my bench about two feet over my head and several more spread around the shop.My premise was that the more light the better.I was flooding my work with light to the point that I had trouble seeing the marks from my gauges.I got a couple clamp style fixtures and put compact flourescents in them.The only thing my local Borg had was 14 watt "warm white light" light output 900.Nothing about color temperature on any literature I could find.

With one of these on each side,behind and above me I was able to see all my lines better.All other lights off.Things are looking better but it needs work.I have to do more experimenting with light placement also. Where do you find 13w 3500k bulbs?Where do you find color temperature listed?

thanks--Jack

Re: Adam,re: PW article

#2

Re: Adam,re: PW article

Adam Cherubini

>Where do you find 13w 3500k bulbs?Where do you find color temperature listed?

Lowe's?

You can find these bulbs on line as well. But experiment.

One thing I've found since I wrote that article is that these bulbs lose both their color temperature and overall lumens over their life. I don't think I'll wait the 5 years for them to burn out before I replace them.

I've also noticed they grow warmer and brighter as they warm up.

I really like using the diffusers, BTW. I've installed them on more of my lights. Also keeps the dust off the bulbs, which probably could reduce lumens in shops with power tools fairly significantly.

Adam

Adam

Re: Adam,re: PW article

#3

Interesting

Jack Guzman

>I noticed a difference in visibility and assumed it was my poor eyes.Now I believe it may be a difference in brightness.It has happened twice,both times after a period of time has elapsed busily creating joints. No lowes here.I'll have to check online.Or maybe I'll go to town and check the electricians supply place. Catching them is tricky for me tho since I only get to town on weekends.---Jack

Re: Adam,re: PW article

#4

Re: Interesting

Dean J in MN

>I always head down to the shop and turn on all my compact flo. lights a while before I need to work, they do take a while to reach full output. Switch them on and go make a pot of coffee/tea. :)

-Dean

Re: Adam,re: PW article

#5

brightness degrades...

Bryan in Broad Ripple, IN

>Your observation of the brightness of these bulbs degrading over time is well known in the aquarium community where the life of the fish/coral/critters literally depends on the proper specturm and intensity of lighting. It's pretty amazing how much the output of these lights do degrade after a few years.

It's been years since I gave up my aquarium, but I seem to recall that 1 year was about the time period that was generally recommended for replacing bulbs.

-Bryan

Re: Adam,re: PW article

#6

Also the temperature seems to affect them

Derek

>When the shop is colder, they do not work as well as when it is warmer. At a minimum, they take longer to warm up. The older T12's are affected even more.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.