WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Ready for another varient?

Posts

Ready for another varient?

#1

Ready for another varient?

mikew

>Hi again Everyone,

Here's a version of an old Smith & Sons cross cut tenon saw we shipped today.


Custom ordered, made to specification. Patterned from a Smith & Son example in our collection. 14", 12 ppi cross cut. 3 1/2" usable depth

And it even has 3 bolts...

Take care, Mike

Re: Ready for another varient?

#2

Try this for the pic 

Alice Frampton, UK

>


img

Re: Ready for another varient?

#3

Re: Try this for the pic

mikew

>Oh Alice,

You may have opened a can of worms without knowing it...

Re: Ready for another varient?

#4

Re: Ready for another varient?

Todd Hughes

>Would like to see a photo of the original .....Todd

Re: Ready for another varient?

#5

Re: Ready for another varient?

mikew

>Hi Todd,

I will post under a new thread when I can get to the photo gear in the spare bedroom where I store it--we have out of town guests who are still snoozing.

In a nutshell, same length, filed past its prime, fewer ppi [9 iirc], and a slightly smaller handle. Marked German Steel on the back below the maker's impression.

Take care, Mike

Re: Ready for another varient?

#6

Re: Try this for the pic

HC Sakman

>Hi Mike,

Purely aestetical point of view, it looks a litlle bit weird, kinda out of proportion. Handle seems too small for the blade, actually it's the other way around I think.

3 nutter this time, eh? ;-) What, the handle wasn't a good fit this time? ;-) ( just stirrin the pot! ;-)

Chico...

Re: Ready for another varient?

#7

Re: Try this for the pic

mikew

>"Purely aestetical point of view, it looks a litlle bit weird, kinda out of proportion. Handle seems too small for the blade, actually it's the other way around I think."

Yep, I'm sure the blade is taller than what an original would have been. My example has been filed past its prime.

"3 nutter this time, eh? ;-) What, the handle wasn't a good fit this time? ;-) ( just stirrin the pot! ;-)"

Yep, three. See, we're flexible . Being that it is an open handle and a large saw, I felt it should be. Especially how a blade fits on an open handled saw. Not much back-of-blade contact. And I thickened the bridge a bit as I felt the strength was necessary for a large, opened handled saw.

For a smaller version, the handle would be the same as the original as well as the blade. And two bolts...

And Chico, I think I already stirred the pot...

Take care, Mike

Re: Ready for another varient?

#8

Nice, A bit...

Scott Burr in Ben Lomond CA

>funny looking, but nice all the same. Give the customer what they want eh.

I see they dogged you into 3 nuts this time too.

Another beauty in my eye, thanks for sharing.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.