bench progress
arw01
>I resawed another pair of 4x6 oak dunnage pieces for uprights. They have been jointed on one face, squared an edge and then all four have been put through the table saw and the thickness planer.
Currently measure about 36" long by 2 3/8" x 3 3/8".
Hope to start making tenons tomorrow night. Then some more mortises to cut for the side stringers and some more mortises for the long rails.
Ah the work on a bench.. good not to think about all the work to come!
Pictures to come tomorrow I think!
Alan
prior progress here:
http://www.webbyhome.com:8080/bench.html