Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Lilac handle

Posts

Lilac handle

#1

Lilac handle

Dave Thompson

>Last week Dan asked to see a photo...

I made a replacement handle for a Witherby chisel using this lilac. I described it as a white wood with purple rings, though now that I look at it again, I guess it's not too white. The handle is finished with tung oil and beeswax. The log (trunk) in the background is estimated to be about 60 years old. It grew on the dark side of a house. The wood has a very tight grain. In the hand it feels most similar to boxwood, but is a little denser.

As I mentioned in my earlier note, one peculiar I found with this wood is that as it grew, the canopy twisted, such that the trunk grain is like a twisted hemp rope. I learned the hard way to pay attention to the flow direction of the end grain when mounting it on the lathe. While shaping butt of this handle, it went flying.

enjoy,

Dave


img

Re: Lilac handle

#2

Very cool.

Jay Samuels

>

Re: Lilac handle

#4

Steve Kubien

Oooooooooo......

Steve Kubien

>Even the picture feels warm to the hand. Very nice.

Steve Kubien

Re: Lilac handle

#5

Re: Lilac handle

Dan Clermont in Burnaby

>Very nice Dave.

Think I might use some Lilac and make some new chisel handles.

Thanks for the pic

Cheers

Dan Clermont

Re: Lilac handle

#6

Re: Lilac handle

Kevin French, Antrim NH

>SWEET! I've saw a bunch of BIG dead lilacs at an old foundation out in the woods. Now I know I'm going after it.

Re: Lilac handle

#7

Alittle help W/lilac

Bob Hackett(Mainely,Bob)

>This stuff is one of the worst I`ve worked with as far as cracking while drying.

I`ve had luck with it only after splitting oversize billets(absolutely no pith),boiling the billets and then Anchorsealing them completely and bagging them so they dry SLOWLY.Even then expect some end checking.

The finished dry blanks are worth the wait though.

MB

Re: Lilac handle

#8

Re: Alittle help W/lilac

Dan Clermont in Burnaby

>Ho Bob,

Boiling, Anchorsealing and then drying in a bag? If you have a 1.5" square chunk how long would it take to become stable? I am thinkng a year.

Cheers

Dan Clermont

Re: Lilac handle

#9

Yep,about a year.

Bob Hackett(Mainely,Bob)

>I have some dry if you want to try turning some now.

MB