Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Back away ?

Posts

Back away ?

#1

Back away ?

Steve Mackay

>I asked the questions you guys seem to put emphisise on. Namely the brass back and the medalion on Disston saws. This is on ebay. What say you ? "the short saw has a bolt large one has medalion both saws has metal it has cast steel writton on them all buttons but one are original thanks for asking "

Re: Back away ?

#2

Am I'm missing something?

Todd Hughes

>Maybe it's sunspot activity or just to close to lunch but my ESP seems to be on the fritz so don't really know what you are talking about. Would help if you told what auction it was you are refering too or at least include a photo...Will note it is rare to find a Disston saw with a brass back....Todd

Re: Back away ?

#3

Re: Back away ? *LINK*

Skip in Falls Church

>Hi Steve,

I saw your original post (link below) but there seemed to be no link to any auction description. If you intended to link to an auction, it didn't make it into your post. Without a link or picture it would be difficult to answer your question - not that I'm qualified to answer it. :)

Skip


http://www.woodcentral.com/cgi-bin/handtools.pl?frames;read=82335

Re: Back away ?

#4

Re: Back away ?

Steve Mackay

>Sorry. New technology ! Does this do it ?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=6247376599&ssPageName=STRK:MEWA:IT

Re: Back away ?

#5

Re: Back away ?

Todd Hughes

>I typed in the auction number in auction search to see the auction....I don't think either one of these saws have a brass back but just the common iron. One is a Miter saw and I suppose the other would be called a tennon saw though lots of dovetails have been cut with simular saws I believe...Really a crap shoot when buying saws like this from a seller that doesn't have any idea how to describe them...Are the blades straight? are they pitted? missing teeth? etc. etc...I don't know....The miter saw is basicaly a tool with out vaule the 12 in. one if in good condition is probably a $35-$40 ebay saw I think......Todd

Re: Back away ?

#6

Re: Back away ?

Skip in Falls Church

>Hi Steve,

Yep - that did it. I really concur with what Todd said. I suspect that the photo quality make the backs look like brass.

Skip

Re: Back away ?

#7

Re: Back away ?

Steve Mackay

>Roger that ! Thanks guys. The learning curveb here it steep but never ending !So just 'cause it is a Sissten dos'nt m,ake it gold ?

Re: Back away ?

#8

Re: Back away ?

Gary B

>the 12" saw is a number 4 I believe, I picked up the same one (for free), but as an interesting aside, when I sent that blade to steve cook to be sharpened, it's useless because the steel is annealed, aparentley it was in maybe a barn fire or something. He said he's only seen a few in his whole carreer that have been like that. good luck, the back is very heavy duty, and the balance is great, it will make an excellent saw. as for mine, I think I'll take sandor's route and make a blade for it out of a drywall knife...some year.