Stanley 79, #98/99 and honing
Derek Cohen (in Perth Australia)
>Hi Pam
I have used the #79 for many years and, while it is more often on the shelf than off it, this is an incredibly useful - if not essential - plane. There is no other plane that can trim the walls of a dado or groove. I often how one gets along without it.
Of course, the #98/99 version is basically just eye candy and the #79 will do it all. I have not had a chance to give the #98/99 a run, so I cannot comment on the differences. Yes, one blade will trail if you leave the #79 set up with both projecting while the #98/99 are used individually. However for years I fluctuated with leaving both blades set up and retracting one or other, and the differences in regard to wear were negligibile. Frankly, just leave it set up.
Honing the little blades is something that I did freehand - until very recently, when I decided to make a jig for my honing guide (LV Mk II). The difference in sharpness is night-and-day as the bevels are now flat (rather than rounded). Have a look at the article section for a piece I wrote on this. It is worth the effort, and I say this with a fairly decent ability to freehand sharpen most blades.
Enjoy the #79.
Regards from Perth
Derek