Shellac question.
Scott Burr in Ben Lomond CA
>Has anybody had any luck wiping on Zinner shellac (i.e. like BLO)?
Would it need to be thinned do ya think? Any other information and ideas would be a great help.
Knowledge You Can Build On — Est. 1998
Shellac question.
Scott Burr in Ben Lomond CA
>Has anybody had any luck wiping on Zinner shellac (i.e. like BLO)?
Would it need to be thinned do ya think? Any other information and ideas would be a great help.
Re: Shellac question.
I'm Dave Too
>Zinnser shellac--sure--thin to between a 1 and 2 lb cut. I wipe it on frequently. One of my favorite finishes when shellac is appropriate for the project.
Re: Shellac question.
I'm Dave Too
>
Thumbs up to Zinser shellac!
Paul in NJ
>I like the Zinser Sealcoat shellac, I have had good luck with it doing a traditional French Polish. Their newer Bulls Eye French Polish is even easier to use. I would recommend both products. I don't know why more people don't use shellac, it is easy to get great dust free finishes.
Paul Dzioba
P.S. I like the Zinser white pigmented shellac to end coat my fresh harvested wood to prevent end checks. I like to label and date each piece with a permanent marker.
One little tiny peek
Jim in Burlington On
>Great looking chest only one little peek at it?
Re: Shellac question.
Dick Schafer
>Scott;
I use shellac almost exclusively. The Zinsser that you're buying is a 3# cut, so you'll want to thin to at least a 2# cut and I would even try a 1# cut.
Just make yourself a balled up rag and go for it. I prefer to use a french polishing rag, but most anything will work.
Sand the first couple of coats and then very lightly the final coat before waxing.
Have fun!
Nice Paul...
Scott Burr in Ben Lomond CA
>The bombay chest turned out sweet. Thanks for the pic.
Thanks for the end grain tip too!
Thanks every one, I'll give it a try!
Scott Burr in Ben Lomond CA
>