Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Schwarz holdfast

Posts

Schwarz holdfast

#1

Schwarz holdfast

ThomD

>I made this up yesterday. First time I have tried anything like this. Used a pretty ugly piece of steel, and it still has some scale on it. I wish I had picked a better piece because the result works perfectly. I based it on Chris' article in Woodworking magazine. I also made a Schwatz style drawbore pin so that magazine was worth what I paid for it!


img

Re: Schwarz holdfast

#2

Re: Schwarz holdfast

Christopher Schwarz

>Thom,

Nice looking holdfast. The shepherd crook's shape is especially useful for mortising. I should also post a photo of the low-profile one that Don Weber made for me -- we dug up a photo from Goodman and modified it a bit based on an early original I picked up on eBay. It's tremendous for planing because you don't hit it.

I'll try to do that early next week. Thanks for the photo!

Chris

Re: Schwarz holdfast

#3

Don't worry about the scale...

Joe Rogers, Northern Virginia

>It probably aids in setting the holdfast. I theorize that the surface of the rod is important and a too smooth rod is prone to slipping or requires heavy impacts to set.JR

Re: Schwarz holdfast

#4

Re: That lady propane

ThomD

>Thanks, I would love to see that. It started out a lot lower profile because the susccessfull version in the original article, pre Tools For Woodworking, where flat, and I thought that might be a point in getting more flexibility out of the holdown. I pretty much nailed that shape right out of the gates. I measured the pad at 83 degrees pretty dead on. Then I figured why not curve the pad a little, and that subtle change forced me to go way high up in order to get the position back to 83 degrees.

I thought the 83 degrees might not work on the thicker topped benches, but it seems fine. Nice thing about a gas forge is one can just tweak the angle at will like cooking a hotdog on the grill, Hank Hill would be proud of me.

Re: Schwarz holdfast

#5

Re: Don't worry about the scale...

ThomD

>Mill scale is dirty, though it can just be washed, and I agree about grip. I like it to look a little primative. Just a little tunning will be required. Also the more black the less red as far as oxydation is concerned.