Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Stanley no 2

Posts

Stanley no 2

#1

Stanley no 2

Gary B

>Hey everyone,

I'm new to this site, but I must say it's great. I recently was extremely fortunate (I think anyways) to find a nice clean #2 for 10 bucks at a garage sale. it has the solid machined frog like a type 11 and rosewood knob and tote. I think it'll clean up extremely nice, as there is no pitting, near all jappaning, etc. can any take a stab at it's value? thanks,

Gary

Re: Stanley no 2

#2

Re: Stanley no 2

Todd O. Cronkhite Maine Native now in Jax Fl.

>Value? there is NO value to a #2. they are a total waste of space and material. Who evewr came up with the #2 should be taken out back, tied to a post and SHOT!

Best thing you can do with that #2 is put it in a box and send it to me. I need one to use as a paperweight.

O.K., I'm kidding. #2's are selling for several hundred dollars ($200 and up) on e-bay day in and day out. I bought one 10 years ago and paid $200 for it. #2's are the next #1, and as well all know

they usually start at around $1000.

$10 #2? I HATE you! ;~)

Welcome to The Island, stick around and enjoy the ride down The Slope.

Todd O.

Re: Stanley no 2

#3

Re: Stanley no 2

Gary B

>thanks for the speedy response, I think I'll tune it, enjoy it until I retire, then I might sell it (I'm only 26 now)

Re: Stanley no 2

#4

Re: Stanley no 2

R.J.Whelan (Eastern Sierra, CA)

>Gary ... congratulations.

A lot of people think this size is a novelty; I had one for several years and found myself using it pretty frequently. If your hands are large (like mine) you may find coming up with a comfortable grip a bit of a challenge - I always make my own knob and tote (even for brand new planes) so that helps - if you go this route be sure to save the originals as the plane won't be worth as much without them.

Good luck with your new plane ... rj

Re: Stanley no 2

#5

Re: Stanley no 2

Moses Yoder in White Pigeon, MI

>What is the overall length of the plane? What makes you think it is a #2? Toddo is right, if it is in fact a #2, you really got lucky. The one thing about finding a tool like that is if you sell it, you will probably never find another deal like it. I got my #2 at an antique shop where they were having a pretty good sale and ended up paying $165 for it. My tool buddy from hell sold it to me. I ended up finding an iron for it that is like new at a M-WTCA meet but had to pay $20 for the iron. It is a very nice plane to use.

Re: Stanley no 2

#6

Never tried a no 2

Bill Houghton, Sebastopol, CA, gettin' soggy

>but on my No. 10-1/2, on which the tote is too small for me, cupping the tote in my hand, with thumb and fingers running along the sides of the tool, kind of like you're pretending it's a wooden plane, works fine.

Re: Stanley no 2

#7

Re: Never tried a no 2

Gary B

>bill,

its funny you mentioned that, because that's the way I instinctively held it last night, my thumb kinda wrapped around the tote, and my four fingers laid against the body. I found it quite comfortable. I think I'll get alot of use out of this plane.

Re: Stanley no 2

#8

Re: Stanley no 2

Gary B

>The sole is 7 1/2 inches by 1 15/16, and it is cast " No. 2" in front of the knob. everything seems intact, the blade seems original. The rosewood knob and tote need to be cleaned up and refinished, but are intact. The blade has a pat date of 1918,750 on it. I'm not sure where that put's it date wise. like I said, it has a solid machined frog like a type 11. the only thing that suprised me was it not having a frog adjuster, but it has no hole for one either. I'll post a pic if I can get one taken.

Gary

Ps. I also got 3 Ashley Iles carving gouges for a buck a piece!!!!almost felt guilty

Re: Stanley no 2

#9

Re: Stanley no 2

Todd Hughes

>Sounds like about a $200 -225 plane from my experance selling them on ebay. If broken up for parts will be worth probably $350 or so. While back I sold a nice but nothing special 2 which went for around $175, had owners initials stamped on the side which hurt it. Right after that I found another that had broken up wood so parted it out and it went for a $100 more![$275] From all the emails asking if I had any no.2 wood I am sure the wood would have gone for at least $75. Have sold a broken tote for a no.2 for $30 befor....I think the next no.2 I get to sell will be going to the parts yard!

I sort of like no.2s and have about half a dozen from different makers including a couple corrugated ones.While I have paid more for some, I have bought more then one for $10 or so.Have a real nice Sargent corrugaited one that I picked up for $5 late in the day at a little dirt hole flea market.In my experance buying them and again I have bought many, lots of sellers don't place much importance on them because they look just like an ordinary plane .......Todd

Re: Stanley no 2

#10

Re: Stanley no 2

ernie miller

>on that day it was worth $10 Todd sells the most so I would be beleave him.

Re: Stanley no 2

#11

Gary... *LINK*

Scott Burr in Ben Lomond CA

>A $10.00 No. 2, YOU SUCK!

Have a look at the link and you'll get an idea of current values.

Is it courgated?

I use a no. 2 alot for smoothing small boards. I hold it like a coffin shaped plane myself.


Completed auctions