Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Ya'll make it look easy (subliminal gloat)

Posts

Ya'll make it look easy (subliminal gloat)

#1

Ya'll make it look easy (subliminal gloat)

Raymond Overman in SC

>I never post over here on the hand tool side but I now have an occasion to. Between my loving wife, her grandmother, and my brother and sister in-law I recieved a Japanese saw, a Lee Valley dovetail jig, a set of seven Lee Valley chisels, and a Stanley block plane for Christmas. This weekend, things finally slowed down enough to afford me a little time in the shop. I've never done much flat work and less still with hand tools but I thought I would try my hand at cutting some dovetails in hopes by next year this time, I could make a nice custom jewelry boxe for my wife.

Needless to say, my first try over the weekend didn't yield an acceptable joint to win any awards. It was tight but had a small gap under one of the tails. Through a little patience and preserverance I think I can get the hang of it though. I look forward to posting pictures once I get a presentable product.

Re: Ya'll make it look easy (subliminal gloat)

#2

Steve Kubien

Re: Ya'll make it look easy (subliminal gloat)

Steve Kubien

>Hi Raymond,

Someone on another forum gave me an idea about how to improve my dovetails. This person recently made a Shaker-inspired cabinet to store nails, screws, widgits, etc. It had about 20 drawers in it. I'm planning on making something similar and dovetailling all of the drawers. I figure, 7 or 8 such cabinets ought to be fair practice. Welcome to the slippery slope! It's a fun ride.

Steve Kubien

Ajax, Ontario

Re: Ya'll make it look easy (subliminal gloat)

#3

Re: Ya'll make it look easy (subliminal gloat)

Greg Bétit, Vergennes, VT.

>Hi Steve,

I just came to a similar conclusion. I just finished the 3rd of 4 drawers for two tables I've been working on for the past two years. They're taking a lot longer than I thought remembered the last drawers took. I've been working almost exclusively on chairs, and my casework skills need some attention. So I'm thinking I need to make a multi drawer base chest for my tool box, or some similar multi drawer project. ��������� ��� ��� - or something like that- Repetition is the mother of learning.

Greg

Re: Ya'll make it look easy (subliminal gloat)

#4

Jack Guzman from Maine

Re: Ya'll make it look easy (subliminal gloat)

Jack Guzman from Maine

>Ray,

It sounds like you did better than I did on my first try. Since I figured out I could I've been putting dovetails into everything I can think of.I love it when they go together straight from the saw(I wish I could do it every time).Welcome to the quiet side.I hope you stick around.---Jack

Re: Ya'll make it look easy (subliminal gloat)

#5

Steve Kubien

You may be meaning...

Steve Kubien

>..."Learn by doing." That is something my sensei keeps trying to pound into my head (and my shoulders, knees, solar plexus etc) regarding the martial arts. Don't ask questions. Just do it. If it is wrong, you will be corrected.

My understanding is that this is the way things were hundreds of years ago and the still carries on to this day in traditional Japanese dojo's. Pretty tough for a 30-something guy who has always asked lots of questions. Then again...my technique is improving.....

Regards,

Steve Kubien

Re: Ya'll make it look easy (subliminal gloat)

#6

after fifteen years...

frank shic (walnut ck, ca)

>you'll be a pretty good BEGINNER! those are the words of encouragement presented to frank klausz by his father. if you ever need inspiration, check out his dovetail a drawer video.

Re: Ya'll make it look easy (subliminal gloat)

#7

Re: You may be meaning...

Greg Betit, Vergennes, VT.

>WC let me put the Cyrillic characters in the Posting Form, but didn't quite come through when it came up on the forum.

Learning by doing is a couple steps short of learning by repetition. Come to think of it, this is an allegory of the parent cultures' approaches just about anything. Zen is subtle, the Russian way is brute force. At my age something subtle is a lost cause, I need to take the rote route or it won't register in my thick skull.

Greg

Re: Ya'll make it look easy (subliminal gloat)

#8

Re: after fifteen years...

ThomD

>His method is actually a good one for a beginer to try out. Stuff he does that some people seem to think is just for experts is actually good for beginers. For instance he says you don't need to mark square or initial the vertical lines unless you are "very beginer". I found teaching dovetailling that not marking the vertical lines helped people learn to saw straight just seemed more profitable to get people to try to make the saw fall in a vertical line that to try to micro zig zag it in following a mark.

His sparce layout seems a little magical, but all the lines you actually need are there, and the method is so fast that you don't get hung up on boring steps that everyone finds comfortable fiddling with layout. One can concequently get more "doing" into a given session.

I think with super hard woods and fancy looking layouts (twisted dovetails anyone?) it pays to do a little more layout, even with a knife. But for learning and functional work I think his method is great.

Re: Ya'll make it look easy (subliminal gloat)

#9

Re: after fifteen years...

frank shic (walnut ck, ca)

>thom, i was initially pretty DAUNTED after watching the dvd and put it back on the shelf for a couple of months until popular woodworking had him detail his layout method in a feature article. after watching the dvd again, i realized that he had said the same things as before, but the picture in popular woodworking (which i've noticed is also in anthony guidice's tables book) really drove the point home. after doing it FRANK'S WAY for the past two months, i must say that it has been quite LIBERATING and i hope someday to thank him in person - won't he be flattered that i ran out and bought all four other videos shortly afterwards?

Re: Ya'll make it look easy (subliminal gloat)

#10

Re: after fifteen years...

ThomD

>I can provide room and board for those DVDs if they enjoy travel.

I do use his method of spacing, but even if one wants to have nice fine pins, then I just hasty tick mark those location with an appropriately sized chisel, and get cutting. You can only get a feel for something by trying to feel it. Trying to control it binds up the flow.