Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Merry Christmas (also LV gloat)!

Posts

Merry Christmas (also LV gloat)!

#1

Merry Christmas (also LV gloat)!

Derek

>I hope you all are having a wonderful Christmas!

I don't usualyy like to gloat but I had a Lee Valley Christmas this year! Jointer plane & fence (was actually ordered for my birthday but did not come till just before Christmas). Medium shoulder plane (from eldest daughter)! New honing guide (also from eldest daughter)! Also - spare blades!

Now I have a big problem - they gave me so much, what do I wish for next year?

Re: Merry Christmas (also LV gloat)!

#2

Re: Merry Christmas (also LV gloat)!

mikew

>"Now I have a big problem - they gave me so much, what do I wish for next year?"

Now don't you think Rob & Company will help you find more goodies to want by then? .

He has never failed me!

Take care, have fun, make shavings.

Mike

Re: Merry Christmas (also LV gloat)!

#3

I went to the store yesterday

Denis Ch�nard, Orl�ans, Ont.

>I brought a list of things that I wanted, along with a friend of mine. I had to exercise some restraint, as the total sum of the list was well beyond $1000...

In the end I bought the new winding sticks, the steel straightedge, a small Munjingfang smoothing plane, and a couple other things.

I also had the opportunity to chat with both Rob and Leonard Lee, who were at the store. That was fun!

Derek, I wouldn't worry too much about what to wish next year. LV has the knack for creating/finding new products that you will want... I know I've never run out ...

Merry Christmas!

DC

Re: Merry Christmas (also LV gloat)!

#4

Here's what Lee Valley needs to make...

John K in Hastings, MN

>- Small shoulder plane just under .500" cut.

- Small router plane like a 271, with the newer blade adjust.

- Automatic blade sharpener (just put it in and it comes out stropped to hair-splittin' sharpness)

- Fancy shooting board for use with the LA Jack

And, there probably still a few things you didn't put on the list yet.

Re: Merry Christmas (also LV gloat)!

#5

No fair!

Derek

>I just measured the width of the sholder plane. It is 0.707" wide. The blade is only 0.707" (exactly) too!!! It's a good thing they got me a spare blade or there wouldn't be room for fettling (the spare is 0.712").

This is just taking precision machining too far!

Thanks Rob! :>)

Re: Merry Christmas (also LV gloat)!

#6

Re: Merry Christmas (also LV gloat)!

Imdavetoo

>Why the large shoulder plane, of course! :)

Re: Merry Christmas (also LV gloat)!

#7

Re: No fair!

Imdavetoo

>You could call LV and explain the blade is narrow than the design, which allows for the blade to protrude a bit from both sides. I'm certain they will be willing to send you a new one.

Re: Merry Christmas (also LV gloat)!

#8

Actually

Derek

>Having them exactly the same width is perfect - I was pretending to complain! :>)

Re: Merry Christmas (also LV gloat)!

#9

Re: Actually

Imdavetoo

>That one flew over my head! (the instructions indicate the blade is a bit wider than the plane) The blade on both my shoulder planes are just proud of the sole on both sides.

Re: Merry Christmas (also LV gloat)!

#10

- Small shoulder plane just >.500" cut is the ONE!

HC Sakman

>

Re: Merry Christmas (also LV gloat)!

#11

Re: Here's what Lee Valley needs to make...

Imdavetoo

>I was thinking a couple of days ago, that if LV makes a much smaller shoulder plane, I'll buy it.

Re: Merry Christmas (also LV gloat)!

#12

Re: Here's what Lee Valley needs to make...

ydb1md

>How much smaller can you get? 1/2"? 1/4"? Like a "bunny plane?"