Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Interesting woodie

Posts

Interesting woodie

#1

Interesting woodie

Bill Houghton, Sebastopol, CA

>We went garage saling this afternoon (after taking the cat in for shots and waiting forever for the chimney sweep), and the last sale had an interesting woodie: the shape of a coffin smoother and about the same size, but an iron tilted back to somewhere between 30 and 40 degrees, bevel down, no chipbreaker. Would this be a wooden version of a block plane, then?

I didn't buy it - we're down to the wire on paying off the house, and the price was a bit high - but I have to admit I was intrigued.

Re: Interesting woodie

#2

Re: Interesting woodie

Todd Hughes

>Sounds like a miter plane. Not very common in my experance though I have a few. Normaly they are slightly longer and lower then a regular smoothing wood plane and I believe the blade goes in bevel up which is why they are found with out chip breakers. Kind of a desirable plane esp. if in very good condition. I have sold them for 3X or so what a regular wooden smoothing plane would go for...Todd

Re: Interesting woodie

#3

Re: Interesting woodie

Bill Houghton, Sebastopol, CA

>Iron is slightly on the skew too.

The body's not in great shape - as I recall, one of the abutments for the wedge was cracked. Maybe I'll figure out how to sneak out there and look tomorrow.

$10 seem like a reasonable price, Todd?

Re: Interesting woodie

#4

Re: Interesting woodie

Todd Hughes

>If the iron is skewed I think that would make it a very unusual plane. On the ones I have had they seem to be a little better made plane then just a regular block plane. I was skinned out of a beautiful fruit wood one made by a good baltiomore makers years ago by a collector when I was even a bigger slow head then I am now. I still think about it!....I would have bought the plane you saw for $10 unless the side was busted all the way out.....Todd