WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Old Belknap Saw (2nd Try)

Posts

Old Belknap Saw (2nd Try)

#1

Old Belknap Saw (2nd Try)

Randall Johnson

>I have a "W.B. Belknap & Co." hand saw and from what I have googled, this company only used the above name on their tools from 1860 to 1880. The medallion on the side of the handle, along with the makers name above, says "The Homestretch" and in the center depicts two horses' heads in a race. One just slightly ahead of the other. Does any one know anything about this saw? I could find no info (history/scarcity/value) on "The Homestretch" logo and saw. Any help would be much appreciated.

Re: Old Belknap Saw (2nd Try)

#2

Re: Old Belknap Saw (2nd Try)

Todd Hughes

>I bought one of these a few years ago, unfortunatly I don't know where I put it.I do remember thinking it was a rather interesting saw and wondered what it was worth.Not a very high quality saw but still neat.I don't remeber my saw having split nuts but i could be wrong.If from 1860-80 it would have to have split nuts i would think...does your saw?

...Belknap was a hardware store [still in bussiness I believe] and sold Bluegrass tools which there is a good bit of interest in and to a bluegrass collector this might be a desirable saw.Apparently being in Ky. they used the horse racing conection with some of what they sold .....Todd [who got to look around for that saw....someday

Re: Old Belknap Saw (2nd Try)

#3

Steve Kubien

how many...

Steve Kubien

>saws are on the shelves at the DeadHorse? I've seen the pics but I still don't believe them.

Steve Kubien

Re: Old Belknap Saw (2nd Try)

#4

Re: how many...

Joe Rogers, Northern Virginia

>Bet ole Todd uses cubic yards :-) to measure the saws not individual numbers.JR

Re: Old Belknap Saw (2nd Try)

#5

Re: how many...

Todd Hughes

>Got me, figure more then a couple....I know when I moved a few years back they pretty well filled up a pick up truck. Of course i have bought a good many since then

....I really try not to buy many saws anymore unless they are in nice condition or very old but I still have a hard time esp. since they are normaly so cheap.I thought I was doing pretty good passing on an otherwise pretty nice no.12 today that had some handle problims but was only priced at $2...of course couldn't turn down that early 1800s flat bottom saw for $3 on another table!

.....Was cleaning up my back sun porch last week and saw the two big tool chests I have packed with backsaws, when I get to them might have to post a photo.....Todd

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.