Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

are they still selling NEW stanley 71's?

Posts

are they still selling NEW stanley 71's?

#1

are they still selling NEW stanley 71's?

frank_shic (walnut ck, ca)

>my quest is ALMOST complete after racking up quite a tab on ebay for a stanley smoother, a jack, a jointer, a 45 combo, a scrub and a shoulder plane. while searching for stanley 71 router planes, i noticed that in one of the descriptions the seller claims to have bought the plane just last year! anyone know if they're still available?

BTW the $40 highland hardware frame saw is working ok, but could definitely use some sanding as i got a couple of splinters while fervently hacking away at some scrap pieces. nevertheless, i can't get over how QUICKLY this awkward-looking tool cuts! i told my brother to get me the ece tenon frame saw just for comparison since he INSISTED on buying me a birthday present.

also installed a record vise clone from lee valley, bored some dog holes in the cheapo pine countertop i bought from home depot (stop laughing, ok?) and can't wait to start trying to cut dovetails and tenons as a proper initiation into the rapid DESCENT!!!

Re: are they still selling NEW stanley 71's?

#2

Re: are they still selling NEW stanley 71's?

Frank D. in Montreal

>I know two places here in Montreal that sell them. A low volume item to say the least, I suspect they might just have old stock that hasn't been liquidated since they stopped making them. The newer ones sure don't look as nice as the old ones though.

Re: are they still selling NEW stanley 71's?

#3

Re: are they still selling NEW stanley 71's? *LINK*

Bill Houghton, Sebastopol, CA

>I own 2-1/2 (one's slightly broken, so I'm not counting it fully), but if I were going to buy new, I'd consider Lee Valley's re-design. If the link below doesn't work, go to http://www.leevalley.com, then follow the links to woodworking tools, planes, Lee Valley specialty planes, and the router plane.


I think this will show it

Re: are they still selling NEW stanley 71's?

#4

$125?!?

frank_shic (walnut ck, ca)

>thanks for the advice, bill, but i'm trying to start a CHEAP downwards descent - although i must admit that all the talk about those bevel up planes from lee valley has made me reconsider this strategy of acquiring older stanleys!

Re: are they still selling NEW stanley 71's?

#5

thank goodness for the canadians!

frank_shic (walnut ck, ca)

>frank, do you have the source information? would love to send some american greens up in that direction!

Re: are they still selling NEW stanley 71's?

#6

Re: are they still selling NEW stanley 71's? *LINK*

mikew

>Anyone selling Stanley tools can order one.

The link to Stanley Tools shows it is a current item.


Stanley Router Plane

Re: are they still selling NEW stanley 71's?

#7

Re: thank goodness for the canadians!

Frank D. in Montreal

>Hi Frank,

The two stores that sell the 71 don't sell it online, although one store does have a Web site ( www.langevinforest.com ). AS Mike pointed out below they still seem to sell it, so you can probably order it from a store near you, maybe even your local hardware store. If you have any problems getting one just send me an e-mail, I can always arrange something for you.

If it's anywhere near the price of the LV I'd follow Bill's suggestion (LV). Otherwise, I'd also suggest you try e-Bay, if you wait for the right auction you can probably get an older one at a comparable price if not cheaper. The new ones don't look nearly as well made, the fit and finish is not at all what it used to be (the nickel plating looks horrible on the new ones, and the castings are quite rough, the handles are plastic I believe...).

Frank

Re: are they still selling NEW stanley 71's?

#8

better in the good 'ol days

frank_shic (walnut ck, ca)

>thanks for the comments everyone. i'll just continue perching on ebay and look for a decent UNBOXED stanley 71. have you seen what happens to the prices when the seller manages to throw in the original box?!?

Re: are they still selling NEW stanley 71's?

#9

Re: better in the good 'ol days

George Makowski

>Frank, I too am building up my stable of handtools on the budget plan. The last time I saw new #71s in the Highland Hardware catalog several years ago I believe the were about $90.

I recently bought a roughly 1917-early 20s #71 with all three cutters (no fence or fence grooves, first model spear point cutter) for just under $40 including shipping on e-bay.

When you shop for one, be sure that it has all the thumbscrews. They are 1/4 x 28 thread, easy to find in a machine screw, very hard to find in a thumb screw. I got lucky, the seller found and sent me the screw that was missing from my #71 when I received it.

Happy routing!

George in AL

Re: are they still selling NEW stanley 71's?

#10

Re: $125?!?

Moses Yoder in White Pigeon, MI

>Every single LV tool I have seen functions at an exceptional level. About a weeks pay for that router plane I think is not a bad deal, and probably a pretty good deal. I have a 71 and 71-1/2, and just used one recently and found out how well it works. If I was a passage door installer I would most certainly buy the LV router plane.

Re: are they still selling NEW stanley 71's?

#11

importance of depth gauge

frank_shic (walnut ck, ca)

>george, what a deal for less than forty smackers! do you think your hand routing would be improved with the depth gauge as they're usually missing along with the fence?

Re: are they still selling NEW stanley 71's?

#12

Re: Functionality vs. Traditions vs.

William Duffield, on the Cohansey

>Aren't these kinds of questions great? There's just no Right Answer, because the guy asking the question usually has no idea how complex his question really is, or how many different choices he has. He usually gives us insufficient clues about what he is trying to accomplish with the tool in question or where he is going with his woodworking, so we get to guess, or make up our own scenario.

Just when we think we understand all the pros and cons, Rob goes and throws a wooden shoe into the gears.

The choices are legion, in routers, as they are in planes, or chisels, or marking and measuring, or anywhere else our imaginations take us. There are traditional tools from the traditional mass producers of iron and steel and brass, There are even older tools, from before the industrial revolution, there are the tools we can build ourselves, there are new tools still being produced by the old companies, and there are new tools produced by new companies with a vision of the future, and even new tools produced by companies without that vision of a new, sophisticated market but with a view of a different, perhaps "third world" market. And also, there are Porter-Cable, Bosch, Triton, Whiteside, CMT. etc. (Let's not go there).

And, there are the applications the budding Neanderthal knows he needs the tool to accomplish, and those others he won't discover until he has used the tool and has begun to understand it. For routers, there are hinge mortises, tenon cheeks, flattening the field of a piecrust table, letting in veneers and string inlays and purfling and quirks and so many other things to route out.

When one chooses a router, is it just to efficiently work wood, or is there also a connction to traditional ways of woodworking, maybe even those of your direct ancestors, or is the building and using and understanding of the tools you have built yourself what drives you to choose a particular tool? Should you choose the tool that works the best or that is the most versatile? Is durability or time spent on maintenance important to you? Is the best tool a lot more than you need? How much time can you afford to spend searching for an old tool that does what you need? Does it have to look like the tool your grandfather, or your great great grandfather used? Is one router enough for you, or do you need lots of them?

Even if we decide individually that one of Rob's is more router than we need or are willing to pay for, at least we can be assured that it will have an advantageous effect on price of the old Stanleys we may want to buy. Routers are simple enough that no woodwork should be afraid to build one of his own.

We can help you, Frank!

Re: are they still selling NEW stanley 71's?

#13

Router plane

Bill Houghton, Sebastopol, CA

>Frank,

An administrator posting recently reminded us all to include e-mail address in our tagline.

But I have a more immediate desire for your e-mail address, which is that I'd like to talk off-forum about your router desires. If you have an e-mail address, please e-mail me.

Bill

Re: are they still selling NEW stanley 71's?

#14

just emailed you

frank_shic (walnut ck, ca)

>

Re: are they still selling NEW stanley 71's?

#15

armed and clueless

frank_shic (walnut ck, ca)

>william, thank you for that highly thought provoking message! you're quite right in the sense that i am a budding neanderthal and i'm just BARELY beginning to grasp the basic skills: dovetail, mortise and tenon, surfacing stock. since there is absolutely NO WAY that i can spend the next five years in a traditional apprenticeship program with a full-time job, a wife and a daughter - not to mention another on the way! - the advice given here are sheer PEARLS of wisdom that i value highly. when i first stumbled upon this forum last year, i could not believe that all this great advice (for the most part!) was going around for FREE!

as for tradition vs functionality, there's nothing quite as enthralling as taking a former too, restoring it to glory and putting it to good use, is there? unless you start reading the whole slew of threads and reviews on the bevel up planes by lee valley or the that new router plane... as for me, i'll stick with the older versions until i've proved my mettle to justify the pricier upgrades.

Re: are they still selling NEW stanley 71's?

#16

Re: importance of depth gauge

George Makowski

>Frank, My #71 did include the depth gauge. I made sure of that when buying since the depth gauge rod has two purposes, it holds the closed mouth shoe in place when needed in one position and serves as the depth gauge in another position.

I haven't used it enough to know if I will use the depth gauge feature much. So far, since I have marked the depth of dadoes with a marking gauge so that I can saw down evenly across the board, I have simply chiselled out most of the waste and then routed down to the gauged lines.

As to the fence. I had been holding out for a #71 with grooved bottom and fence until I read a thread on this site where folks weighed in about how often they use their #71 fences. The answer was almost never. Also, I can always add a wooden fence for a particular job if need be. It seems that early #71s without the open throat arch and then those without the built in fence grooves and screw holes are less expensive than the later models. Also some #71 1/2s.

I agree with the later post below about "ideal tools" and making what you can. A shop made router is among my future projects, but I also love the mechanichal wizardry of specialized metal planes and I wanted a router plane to experiment with sooner rather than later.

Good routing!

George in AL