Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Schaefer and Cobb, Dwights French

Posts

Schaefer and Cobb, Dwights French

#1

Schaefer and Cobb, Dwights French

john jesseph

>Hi folks- I bought a rough old plane yesterday, thought I'd ask around about it. I can make out "Scha**** & Cobb" "Cincinnatti" on the toe, and the iron says "Dwights French". Wish I could find my digital camera! It is a coffin smoother, single iron. As far as condition, poor and rough- major cracks across the toe, etc., but no cheek cracks. I bought it for the single tapered iron, thinking of using it for a new smoother, but it seems pretty old, so I hate to mess with it if it has some value.

I may also fettle it and see if I can borrow a new LV BUS and do comparison! Would make a pretty good photo documentation, with the giant wood screw in the side holding it together. Bet I could get it into Clark and Williams polishing condition...

Thanks in advance...John J.

Re: Schaefer and Cobb, Dwights French

#2

Re: Schaefer and Cobb, Dwights French

Bob Hackett

>I have 2 planes with French irons,one is a lignum spar plane.

I`ve seen afew more up here and it may be either the a boatyard or a New England thing but I`m just guessing as far as that goes.

The irons sharpen up and perform well,about what you`d expect from any of the old laminated cast steel irons.

I see nothing wrong with making a new body and installing the old iron in it.If someone reports that these are ultra rare and wildly valuable you can just put it back in the old body and never let on that it was used to smooth modern lumber(shudder).Be sure to let me know if an auction house calls and offers to represent you,remember I still have 2.

Good luck with it.

Mainely,Bob