Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

diamond paste question

Posts

diamond paste question

#1

diamond paste question

les winter

>I'm using diamond paste (water based from Joel) to lap the backs of some chisels. I'm using Lexan 1/4" thick over flat maple as a base.

After hard working, the paste turns gummy and seems to roll off in sections similar to the glue left behind from the pricing stickers that Home Depot uses.

If I apply some more paste, it works fine for a bit.

Am I doing something wrong?

thanks

Les

Re: diamond paste question

#2

Add lubricant

bill tindall

>The metal you are removing is sucking up lubricant and making a paste. Add more liquid to float this gunk away. The diamonds are throughly stuck in the substrate if all is workng well, so don't worry about them going anywhere. Acrylic (pexiglas) is a better substrate because it is harder. The softer the substrate the more the diamonds bury and the less agressively they cut.