Re: thanks...
William Duffield, on the Cohansey
>But, you're going to have fun trying to find a gouge or a set of gouges to fit either a French Curve or your freehand curve. You are better off letting your design fit the tools at hand. Using the carving gouges to both draw the curves and cut them is much more efficient. That is one of the difficulties of gathering a tool set for doing reproduction furniture: to do it right, you need a pretty close copy of all the tools originally used by all the guys whose work you are trying to reproduce, and their smith probably didn't make any of them to a standard English or Swiss pattern. For long sweeping curves, use a spring batten and a bunch of awls (ice picks), like Bob shows, saw it freehand on a bandsaw and smooth it by eye and by touch with a rasp.
The problem most modern amateur furniture makers have nowadays is having been forced into thinking within the rectangular Craftsman and Shaker boxes that are so much easier for the woodworking magazines to develop successful plans and instructions for. They've been rectilinear precision jigged and fixtured to artistic death. It is often pathetic to watch them try to expand their horizons just a little by putting one curved line in their next project, and then waste so much time trying to jig and fixture that curve with engineering precision.