Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Musings on a scrub plane

Posts

Musings on a scrub plane

#1

Musings on a scrub plane

Dave Anderson Chester, NH

>Back in an earlier issue of PW and an earlier thread on this board Chris Schwarz postulated about a scrub plane being used to quickly remove stock from the edge of a board and on how scrubs were quite possibly carpenters tools. Over the weekend I needed to slightly hollow the back of a piece of 1" x$' pine being which I had put a quarter round on as a piece of edge molding at an outside corner in my bench room. I grabbed my trusty Stanley #40 scrub and planed out a recess on the back side over the full length of the stock. Worked like a charm and took all of a minute and a half. No other approach would have worked as well or as fast with either a hand or power tool.

The point of this little anecdote is that it is really useful to try new ideas and never blindly categorize a tool as only for a particular purpose. Thanks Chris for the insight and congratulations on your new promotion at PW. Got the new issue yesterday in the mail and it's already read cover to cover.

Re: Musings on a scrub plane

#2

A chisel with a tote

Jim Reed @ Tallahassee

>good point. I have sometimes used my scrub like a big chisel with a tote. It is a handy tool to have around.

Re: Musings on a scrub plane

#3

Re: Musings on a scrub plane

mikew

>Hi Dave,

I do the same everytime I feel like playing finish carpenter. I was shown to do this by an old carpenter. It was one of the three handplanes always in his stool/toolbox he used on-site.

It does work well for wasting an edge, too. At least if there isn't too much camber.

Mike

Re: Musings on a scrub plane

#4

Re: Musings on a scrub plane

Frank D. in Montreal

>I use my scrub quite often the same purpose. I also use it to take cup or bow out of studs and framing, I've even used it to make recesses for plumbing and wires between double joists.


img

Re: Musings on a scrub plane

#5

Hey Mike

Todd O. Cronkhite Maine Native in FL. Exile :~(

>It was one of the three handplanes always in his stool/toolbox he used on-site.

-What was the other two?

Todd O.

Re: Musings on a scrub plane

#6

Re: Hey Mike

mikew

>Hi Todd,

A block and a #5. In his truck, he also kept a #10 and various larger tools.

His stool also held several chisels, a few nice ones and one set of beaters. He also made extensive use of a fold-up Lufkin rule with the extension end he used to check door and window jambs for square. Add in a few hammers, a couple small handsaws, a small level, string lines, etc., and that was his kit.

btw, he didn't own a cat's paw. I never saw him mis-hit a nail or drive one into a piece of wood he didn't mean for it to remain in place.

Mike

Re: Musings on a scrub plane

#7

Yup

Bill Houghton, Sebastopol, CA

>I posted some time back (like a year or more?) how I shaped porch railing on my apparently-eternal, finally-finished porch project. I used the scrub extensively for wasting away material in shaping the curved profile. I've come to recognize it as kind of a controlled drawknife for straight stock.

Plus, it's just fun as heck.