Shooting Boards
Jerry Thompson
>I am getting ready to make a shooting board. My question is in the use of one. Does the plane take any material off of the boards edge when planing lumber edges or ends?
Knowledge You Can Build On — Est. 1998
Shooting Boards
Jerry Thompson
>I am getting ready to make a shooting board. My question is in the use of one. Does the plane take any material off of the boards edge when planing lumber edges or ends?
Re: Shooting Boards
Norman (Ottawa, Ont.)
>Jerry,
I'm not quite clear what you are referring to.
If you are concerned about the plane shaving off the shooting board backstop, this will occur but only for a few passes.
Once the plane develops a small rabbet like protrusion at the inside corner of the plane track , it is ok.
The protrusion (for lack of a better term) is direclty due to the blade not covering the full expanse of the sole. The small 3/16 ? portion at the sides of the plane sole do not plane away the shooting board channel and keep the plane away from the backstop after a few passes.
Norman
Re: Shooting Boards
Jerry Thompson
>Thank you. That gives me the picture in my mind that I needed.