Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Restoration of Planes?

Posts

Restoration of Planes?

#1

Restoration of Planes?

Erik S. Friis, wish I was in Dodge!

>What is the best reference (document, video, book) on restoring old planes such as some of the Miller-Falls planes I have purchased on eBay? Remember I'm a beginner on the "slope."

I do have a vibratory tumbler in which I use crushed walnut shells and Flitz for polishing parts and was wondering if this would work for plane parts as well. I need to learn about rust removal 101 and flattening, etc.

I also have a rock tumbler in which I use aquarium gravel and water (with lemon juice) for cleaning coins/relics found with a metal detector (yet another reason my wife sincerely believes I'm nuts!). Just thought I'd mention these units to see if there's any cross-over in cleaning techniques between any of my hobbies. Anyone here use Flitz?

Thanks for any info!

Re: Restoration of Planes?

#3

Re: Restoration of Planes?

paul womack

>Here's a page I made, with an outline discussion, and *extensive* links to other sites on cleaning, tuning etc.

introduction to old planes

BugBear

Re: Restoration of Planes?

#4

"Reclaiming Flea-Market Planes" Any Good?

Erik S. Friis, back in Dodge

>This is the Taunton video and unfortunately it's only on VHS, not DVD. They tell me it's about 15 minutes long. And it's with Ernie Conover. Is it worth the $12 + $4.50 S/H? Thanks.

Re: Restoration of Planes?

#5

Re: "Reclaiming Flea-Market Planes" Any Good?

Todd O. Cronkhite Maine Native in FL. Exile :~(

>I really don't think it's worth the $$ Erik. you can learn all you need to know right here. If you was to spend any $$ on tapes get yourself some of the Kingshott or Klauz tapes. They are money better spent and you'll learn alot about "plane tuning" in them to boot.

Todd O.

Re: Restoration of Planes?

#6

I liked it... *LINK*

Ted Owen, Pittsburgh

>and it was worth it to me. Ernie shows, among other things, how to avoid destroying nickel plating--something I screwed up before viewing that video.

It's longer than 15 minutes.

Best, Ted


Ernie Conover Video

Re: Restoration of Planes?

#7

Re: "Reclaiming Flea-Market Planes" Any Good?

paul womack

>I *like* videos on technique - planing, joint cutting, that sort of thing. This is because there's body movement involved, which is hard to describe, even with still photography.

But plane restoration is so well described, both on the web, and in books, I wouldn't see the need for a video on it.

If you just want to get a plane working well, almost any of the "10 step" style dissertations on the web will serve you well.

If you want your plane "to the ultimate", either read EVERYTHING on my site, or get the 2 David Charlesworth books.

Be aware that when I say "ultimate", it involves a lot of fussing. It is your choice wether to go there.

BugBear