Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Maker ID of #2 plane

Posts

Maker ID of #2 plane

#1

Maker ID of #2 plane

Doug Littlejohn

>I have just been given a No.2 handplane with few identifying marks save one on the blade. It has the word "STILETTO" inside an outline that has an arrow point on either end.

The plane the the "No. 2" up front of the knob and no other marks that I can find anywhere.

Anyone have any idea as to the ID, maker and/or history of this??

TIA,

Sherwood

Re: Maker ID of #2 plane

#2

Just a little info *LINK*

Bill Houghton, Sebastopol, CA

>"Stiletto" is an honorable and venerable West Coast-based brand. I have one or two of their chisels, but must confess I haven't put them to use yet. I think they were good tools. No idea about their planes.

The company's still in business, focusing on hammers these days, according to their website, below. An intriguing design.


Company website

Re: Maker ID of #2 plane

#3

Re: Maker ID of #2 plane

wayne anderson

>According to Roger Smith's PTAMPIA, Vol II, pg.351, Stilletto was manufactured by Stanley & others, Millers Falls (c.1950).

Wayne Anderson

Re: Maker ID of #2 plane

#4

Re: Just a little info & and another piece of info

Doug Littlejohn

>Thanks, that helps quite bit. That is exactly the imprint on the blade.

The other thing I forgot to mention is I think the blade is very old. It is the old style, thin at the top and tapering to quite thick at the business end.

I will contact them and inquire.

Sherwood

Re: Maker ID of #2 plane

#5

Re: Maker ID of #2 plane Thanks

Doug Littlejohn

>Thanks Wayne. I forgot to mention about the tapered blade. Normal thickness at the top and tapers to quite thick at the sharp end, about 3/16's. I'm thinking that might help pin down a rough period.

Thanks,

Sherwood

{S. I will try and take some photos and post.

Re: Maker ID of #2 plane

#6

Re: tapered blade

Moses Yoder in White Pigeon, MI

>Ohio tools is the only maker I am aware of that used a tapered blade in a bailey pattern plane.

Re: Maker ID of #2 plane

#7

more info and Pics

Doug Littlejohn

>Here are pictures (or rather links) of the plane, blade, logo, etc. Most interesting (or at least quite to me) is the last picture. It shows what I think might be left over japanning. It was on the blade and chip breaker and appears to be a medium to dark grey. Did anyone do that color japanning? and on the blade and chip breaker?

Thanks again for all of the info.

Sherwood

Not sure I did this right but if these don't show up as links, just copy and paste.

http://image.inkfrog.com/pix/sherwoodworks/P9100048.JPG

http://image.inkfrog.com/pix/sherwoodworks/P9100049.JPG

http://image.inkfrog.com/pix/sherwoodworks/P9100050.JPG

http://image.inkfrog.com/pix/sherwoodworks/P9100051.JPG

http://image.inkfrog.com/pix/sherwoodworks/P9100052.JPG

http://image.inkfrog.com/pix/sherwoodworks/P9100054.JPG

Re: Maker ID of #2 plane

#8

Pretty sure that's not an Ohio

Neal (San Jose)

>I've never seen an Ohio with the round thingey on the end of the lateral adjuster, and that's definitely not an Ohio blade advancement knob. However, I do know they made some planes for Stiletto, and that sure looks like an Ohio tapered blade. Could this be a Stiletto blade that somehow got put in a Millers Falls? I'm guessing MF based on the grey color of the japanning you mentioned.

Re: Maker ID of #2 plane

#9

THanks !! and one last question

Doug Littlejohn

>Yeah, from what I've heard and seen, I'm guessing along the same lines. A MF #2 with an Ohio Tools "Stiletto" blade.

What would the time period be for it to be an MF #2 plane?, what with the frog design and all??

Now all I have to do is get rid of that awful green (can;t believe someone would do that) and re-japan it.

Thank you everybody!!

Sherwood