Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Visited the Museum of Woodworking Tools

Posts

Visited the Museum of Woodworking Tools

#1

Visited the Museum of Woodworking Tools

Jeremy Osner

>Finally made it down to Joel's shop like I have been meaning to ever since it opened. What a nice place! Joel gave me a quick demo of grinding and honing a chisel blade, which did more to make it make sense for me, than all the reading I have done over the years. I came away with a bunch of new stuff for grinding and honing, and I am making a resolution to actually hone my tools regularly and keep them nice and sharp, and see how that changes my woodworking for the better.

Re: Visited the Museum of Woodworking Tools

#2

Sounds like a nice trip...

Scott Burr in Ben Lomond CA

>I'm sure you'll find WW a more pleasurable experience with nice sharp tools. Also it’s a safer endeavor with nice sharp tools.

You going to freehand sharpen Jeremy?

Re: Visited the Museum of Woodworking Tools

#3

Re: Sounds like a nice trip...

Jeremy Osner

>I'm going to be honing freehand. I would like to put hollow grinds on most of my chisels but this will need to wait until I am more confident about grinding, and probably until I buy or build a better tool rest for my grinder -- I was thinking of getting the LV one while I was at Joel's shop but didn't -- for now the only bevels I am regrinding are those with nicks/damaged bevels. Tonight I am practicing on an old Stanley chisel.

Re: Visited the Museum of Woodworking Tools

#4

Your braver than me...

Scott Burr in Ben Lomond CA

>I'm a guide kind of a guy and will probably always be. I like the repeatability of a guide. One thing, I can't recommend the LV grinding guide. Because the base and the blade carrier are both the same material they cause galling. I'd try making a rest for your grinder instead.

Re: Visited the Museum of Woodworking Tools

#5

Re: Your braver than me... *LINK*

Joel

>freehand sharpening the way I learned is a lot more repeatible than any guide I know of. The reason is that each time you sharpen you use the primary bevel as the guide, and it gives you a rock solid totally repeatible reference. Hollow grinding just makes it go faster.


free hand sharpening the way I learned

Re: Visited the Museum of Woodworking Tools

#6

Re: Your braver than me...

Jeremy Osner

>Do you know of any plans for a tool rest? I was trying to think of how to make one and no design came readily to mind...