WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Marking your tools

Posts

Re: Marking your tools

#26

Or delivering groceries

Greg B�tit, Vergennes, VT

>I made deployments with HC-6 flying off supply ships (AFS) in the Med. "Slipping the meat to the fleet". It was a fun mission, somebody had to do it.

Greg -who thought 5 traps on the wooden deck of the Lady Lex in a T-28 was 5 too many.

Re: Marking your tools

#27

Re: Foreign Object Damage

Todd O. Cronkhite Maine Native in FL. Exile :~(

>I never really cared for the term FOD for the stray bits and pieces that we picked up. FOD to be is descriptive of the Damage caused.

Before the item causes damage I think it should be called a FO as on foreign Object

With that said FOD is any item that is in the airplane that shouldn't be there, which in some cases includes the pilots ;~)

Todd O.

Re: Marking your tools

#28

Jim DeLaney, Austintown, Ohio

Re: Foreign Object Damage

Jim DeLaney, Austintown, Ohio

>In the 60's, we referred to it as "Foreign Objects & Debris."

Jim D., USMC, 1966 ~ 1988

Re: Marking your tools

#29

T2 Buckeye

Don Thompson - Cutler Ridge, Florida

>FWIW, I couldn't recall what one looked like, so I found this pic:


img

Re: Marking your tools

#30

Re: Foreign Object Damage

Todd O. Cronkhite Maine Native in FL. Exile :~(

>I never knew that Jim, but like that better than what is used today.

Never made sense to me. "Lets fo find some FOD" which meant, "Lets go look for stuff that will/could/can cause damage" but to me meant "Lets go inspect the airplanes for damage"

The damage was FOD, and what causedwas simply a Foreign Object or F-O for short.

Coarse, with that said, and what with my Infantry background if somebody said let's go look for some F-O's I'd interpert that as Foes and grab up my rifle.

Ahhhhhhhhhhhh well, what with the bajillions of Navy acronyms they all can't be spot on.

Todd O.

Re: Marking your tools

#31

DEFINITELY a power tool

Bill Houghton, Sebastopol, CA

>

Re: Marking your tools

#32

Some of which acronyms

Bill Houghton, Sebastopol, CA

>have provided irreplaceable terms for non-military English. I am thinking not merely of SNAFU, but also the finer distinction made possible by FUBAR.

Out of respect for our non-U.S. cousins, a glossary (slightly cleaned up - this is a family forum):

SNAFU: Situation Normal, all fouled up

FUBAR: Fouled up beyond all recognition

Re: Marking your tools

#33

Lady Lex...

Martin from Granbury

>I have 4 traps and 2 touch and go's on the Lex. It was my boat for initial qual in the T-2C as a student. It is now a museum down in Corpus Christi. Very small deck, expecially compared to the most recently commissioned carriers.

When your hook catches that wire for the first time, you are in awe. When you experience your first cat shot, you are in ecstasy. I have always said someone should make an amusement park ride that captures those feelings, but you could never duplicate the feeling of "I cheated death again".

I miss the cats and traps, too.

Re: Marking your tools

#34

Re: Foreign Object Damage

Mike Real from Pittsburgh

>Hmmm, from my army days I would look for a F-O .....forward observer for the artillery

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.