Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Refurbishing anvil on old saw set?

Posts

Refurbishing anvil on old saw set?

#1

Refurbishing anvil on old saw set?

Denis Ch�nard, Orl�ans, Ont.

>Another "unearthing" from my wife's grandfather's old toolbox...

I have an old saw set that I've cleaned up. From my research the brand is Boker, and it looks quite old. After cleaning it up it looks great, except that the anvil is in bad shape, probably from too many sharpenings.

Has anyone tried to refurbish a saw set anvil, and how? From what I can see the tool is all cast iron.

Could this tool have a value which would be destroyed by "fixing" it?

Thnx,

DC

Re: Refurbishing anvil on old saw set?

#2

Perhaps

Jim Reed @ Tallahassee

>you could assume that there is little collector's value in a well used saw set. Pretty common item and collectors want MINT. With that issue out of the way, I would attack the cast iron with a thin file or emery board. Good luck.