Traditional Woodworker.com

5/13/05, 2:23 PM #1

Jennifer@Indy.USA
Member
Offline
4,681 posts

Registered: 1/5/04

Traditional Woodworker.com

Jennifer@Indy.USA

>Hello Everyone,

I'm thinking about placing an order with Traditionalwoodworker.com. I have no feedback on them from anyone so am looking for some here. Anybody have any experience with them?

Thanks,

Jennifer

- - -

Hello Everybody! I figure I've been hanging around WoodCentral for a few years now so I might as well officially post a Bio. I'm Jennifer and I reside in the heart of the Midwest in Indianapolis. You'll usually find me hanging out on the turning side of WoodCentral, but I check the Main forum too. I started woodworking about 25 years ago mostly interested in flatwork; small furniture and other items to use around the home. Then I discovered the lathe and became obsessed with it. I've been turning for about 23 years now. My love and excitement for turning has taken me into the world of teaching and frequent demonstrating. Lots of experimenting with textures, color, burning over the past several years. I've recently begun dabbling in metal clay work and have started incorporating it in to my turnings too. It's another toolbox full of toys! When I'm not turning, I'm hanging out with the love of my life and most honest critic, my husband Clay. In order to keep the lathe spinning and the lights on I spend the other part of my day at an ABC television station directing the evening newscasts.

Re: Traditional Woodworker.com

5/13/05, 6:37 PM #2

Wendell @ Murphy, TX
Guest

Re: Traditional Woodworker.com

Wendell @ Murphy, TX

>I've seen their website before, but never ordered anything. The free shipping is an attractive deal. I've always found the stuff I was interested in was cheaper elsewhere, but taking shipping into account that may not be true anymore. Is there something unique your looking to buy that you can only through them?

Wendell

Re: Traditional Woodworker.com

5/13/05, 7:24 PM #3

Dean J in MN
Member
Offline
553 posts

Registered: 11/18/04

Re: Traditional Woodworker.com

Dean J in MN

>FWIW --

I have ordered from them, no problems.

-Dean

Re: Traditional Woodworker.com

5/13/05, 8:53 PM #4

Jennifer@Indy.USA
Member
Offline
4,681 posts

Registered: 1/5/04

Re: Traditional Woodworker.com

Jennifer@Indy.USA

>Hi Wendell,

They seem to have the best price on the Wecheer 1/3hp hanging power carving kit that I've seen. Most places don't even show the 1/3 hp, but only the 1/4.

I'll probably order from them, as I haven't heard of any bad experiences.

Thanks,

Jennifer

- - -

Hello Everybody! I figure I've been hanging around WoodCentral for a few years now so I might as well officially post a Bio. I'm Jennifer and I reside in the heart of the Midwest in Indianapolis. You'll usually find me hanging out on the turning side of WoodCentral, but I check the Main forum too. I started woodworking about 25 years ago mostly interested in flatwork; small furniture and other items to use around the home. Then I discovered the lathe and became obsessed with it. I've been turning for about 23 years now. My love and excitement for turning has taken me into the world of teaching and frequent demonstrating. Lots of experimenting with textures, color, burning over the past several years. I've recently begun dabbling in metal clay work and have started incorporating it in to my turnings too. It's another toolbox full of toys! When I'm not turning, I'm hanging out with the love of my life and most honest critic, my husband Clay. In order to keep the lathe spinning and the lights on I spend the other part of my day at an ABC television station directing the evening newscasts.

Re: Traditional Woodworker.com

5/16/05, 5:18 PM #5

Stephen F. Roth
Guest

ME TOO. No problems.

Stephen F. Roth

>

Traditional Woodworker.com

Posts