Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Anant A52 Plough Plane (Long)

Posts

Anant A52 Plough Plane (Long)

#1

Anant A52 Plough Plane (Long)

Ron Smith

>There has been some talk here about Plough Planes, and of course it caused me to worry about making proper grooves. The worry turned into a kind of fever so I phoned Highland Hardware in Atlanta to see if they could get the Anant #52. I have bought several Anant planes from Highland, but their Catelog does not show this plane. As it happened they DO stock the A-52, so I orderd one.

The plane arrived a few days ago: Eight inches long, Nine cutters (1/8-5/8 inches) Fully chromed with a pretty spiffy plastic imitation Plantation Grown Softwood Tote. They chromed right over some pretty rough casting, but the fit is excellent, drillings square and threading sound. I assembled and checked for true and square and everything is really quite excellent. Installed a wood fences, sharpened and mounted a 1/2 inch cutter and went right to work on some soft pine. Disaster struck ! . . .These suckers are HARD to use. The plane-bed, skate, or whatever, is a scant 1/16 inch in width . .it has to be that way to ride behind, and support the narowest (1/8 inch) cutter. The plane must be kept almost perfectly vertical or it will not cut, or will cut too deeply. I would inadvertantly tip the plane to the left, it would, or course, dig in and I would adjust the iron for a shallower cut. And it would quit cutting altogether. Took me some time and a whole 2X4 stud to figure out what had me.

My technique has improved some, and by using a VERY light cuts, chopping in from the 'far' end of the piece, and worrying mainly about keeping the plane dead vertical, and holding the fence really tight, I am finally cutting rather shallow, poorly defined groves. I like the plane and feel it is well worth the $116.00 it cost. I imagine the rather nicely machined cutters are worth $50.00 or so. Comes with two sets of fence rods, and a large Slitting Blade for cutting thin wood or leather.

If you have patience, and tolerate defeat well, this might be a good plane for you. But I warn you a single-skate Plough is a challenge. A Stanly 46, with a second adjustable skate, is easy to run by comparison.

Re: Anant A52 Plough Plane (Long)

#2

Same as the Stanley 12-052?

Gerry Doll

>Ron,

Some time ago, I purchased a Stanley 13-052 from Antique Tools UK. Same issues exist as with your Anant.

Looking at the photo on the Anant website it appears to be a knock-off of the Stanley 13-052, or 12-052. (I have no clue as to what the 12 or 13 designate. Maybe US v UK manufacture?)

One question, does the Anant have any sort of knicker for cross grain work? My understanding is that the Stanley 12-250, another "modern plough", has a fuller skate and 2 knickers for cross-grain (Thanks, Alan.) The 13-052 I have is useless for cross grain.

Gerry

Re: Anant A52 Plough Plane (Long)

#4

Re: Anant A52 Plough Plane (Long) *LINK*

John Meikrantz

>Good grief! I just went to the Anant web site to check it out, and they have a Stanley 45 clone! Wonder what that's going for? Also a copy of the old Record honing guide, and a new honing guide unlike any that I've seen before. They sure have added a lot of products since the last time that I browsed there.

John


Anant planes

Re: Anant A52 Plough Plane (Long)

#5

Re: Anant A52 Plough Plane (Long)

Wendell @ Murphy, TX

>Did you notice the Stanley #39 clone? They have it labelled as a rabbet plane but it looks like a dead ringer for a Stanley #39 dado plane. Too bad it only seems to come in 1/2" width.

Wendell

Re: Anant A52 Plough Plane (Long)

#7

Nickers

Ron Smith

>Gerry- The Anant has no nickers. It does have a large 'Slitter Blade'. This mounts in the place where a nicker would mount on the left side, forward. I guess with some difficulty the slitter could be used to make the cuts for cross-grain work. But too much trouble for me.

Re: Anant A52 Plough Plane (Long)

#8

Guinea Pigs?

Don Thompson - Cutler Ridge, Florida

>All right, who is going to try out some of the new stuff?

(and who is importing it?)

Re: Anant A52 Plough Plane (Long)

#9

Re: Guinea Pigs?

Joe Rogers, Northern Virginia

>Yeah and find out of the knickers from the #39 fit the Stanley vintage planes.:-)JR

Re: Anant A52 Plough Plane (Long)

#10

Re: Guinea Pigs?

Bill Houghton, Sebastopol, CA

>Depth of cut on that "A39" looks pretty limited - seems like the handle would run into the surface about 1/4" into the cut. Odd.

Re: Anant A52 Plough Plane (Long)

#11

Re: Anant A52 Plough Plane (Long)

paul womack

>They sure have added a lot of products since the last time that I browsed there.

Wowza! I know the quality's been(at least historically) suspect, but that's quite a range.

BugBear