Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Taking spoon making to the next level

Posts

Taking spoon making to the next level

#1

Taking spoon making to the next level

Bob Hackett

>For those of you who have been inspired by the spoon making challenge,I`d like to suggest reading Wille Sundqvist`s book"Swedish Carving Techniques" published by Taunton Press ISBN 0-942391-45-4.

The primary tools are knife and hatchet but he does use gouges and spokeshaves too.

The only tailed tools are used for sharpening(with the exception of a brief visit by a neanderbuddy).

The big news in this book is the proper selection and riving of the stock.News that some folks who`s bowls keeps separating from the handle can put to use.

When you get tired of spoons you can always move on to hand hewn bowls.

Mainely,Bob

Re: Taking spoon making to the next level

#2

Thanks, Bob

mike recchione

>I think my problem has been mainly (not Mainely) pilot error. In racing the clock, I was forgetting fundamental principles of both woodworking and carving (not to mention physics).

This may be something for all of us to keep in mind: When you do this stuff every day, these fundamental principles become second nature and you naturally speed up. But if you only get into the shop occasionally, the only defense against rustiness is to take your time and think each step through. This can not only save you from spoiled projects, it can prevent injury.

Having said that, I'll definitely check out the book.

Re: Taking spoon making to the next level

#3

Re: Taking spoon making to the next level

Jorge Castaneda ~ Downeast Maine

>Top of the morning Bob,

When I read your header I thought you were going into production, glad to find you are not. I started on one spoon on sunday, with froe, hatchet and knive and a gouge, then I brought in very briefly a saw, to make cuts on both sides to stop the splits that rough the handle, It was going good until the wife call in for dinner, so the spoon is not done yet.

soon

Jorge

Re: Taking spoon making to the next level

#4

Another book on this subject

Jim Bodin in CR

>is "Carving & Whittling the Swedish Style" by Gert Ljundgberg & Inger A:son-Ljundgberg. Published by Lark books ISBN 1-887374-40-x. I think Cambium books carries this title. I was fortunate to take a weekend class with Wille Sundqvist's son J�gge at Vesterheim in Decorah, Iowa a couple of years ago. Both books have a wealth of info. J�gge also has a video put out by Taunton, I'm not sure if it is available anymore.