Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

12" Lufkin folding rule

Posts

12" Lufkin folding rule

#1

12" Lufkin folding rule

Bob Hutchins in Central Texas

>Got this thing from eBay and the transaction was extremely well handled by the seller. Thanks Suzanne in FL!

The ruler is the kind with a brass pivot pin hinge and a brass slider that has an extention on the end that allows one to measure diameters. The folding is a little stiff and seems to me should be a little easier. Should I lubricate this with a drop of light machine oil or not?

TIA,

BobH

Re: 12" Lufkin folding rule

#2

Re: 12" Lufkin folding rule

Bill Houghton, Sebastopol, CA

>Why not? Seems to me I read that recommendation somewhere in a book written when these were commonly used on the job, but I can't find it this morning.

Re: 12" Lufkin folding rule

#4

Re: Wax...

Bob Hutchins in central Texas

>Thanks Guys!

I squirted some extra light machine oil on my forefinger and used it to wipe down the whole rule very lightly. I then wiped it clean with a blue paper towel. This helped both with the hinge movement (which is still nice and tight but not not balky, now) and with improving the contrast between the marks and the wood.

This is a really nice little rule and caliper. I'd never seen one before but have seen several on the bay since I bought it. Fits nice in my shop apron.

BobH