Nothing like getting the very first.... :- )
Tim of Livermore
>Here it is in use:
Knowledge You Can Build On — Est. 1998
Nothing like getting the very first.... :- )
Tim of Livermore
>Here it is in use:
Re: Nothing like getting the very first.... :- )
Tim of Livermore
>The little one with brass sitting on a 3 inch wide O1 steel iron from Steve and the 32 inch long with 3 inch wide iron plane behind.
Notice the signature in the mouth of the plane ;- )
Re: Ain't you the guy...
William Duffield, on the Cohansey
>...who was just arguing that you could do a better job with nothing but a bunch of forked-tailed apprentices from Harbor Fright?
:^), or as Steve would say, (G).
Re: 3 inches wide iron! Never seen that! Wow!
Marc in Luxembourg
>Come on, tell us how it performs! Please!
3 inch wide
Tim of Livermore
>Marc,
I really like the long and wide planes I've got from Steve. I like to build furniture and so often use thicker stock for legs and other parts. His 2 inch wide irons aren't actually 2 inches wide and even still....keeping 2 inch wide iron for a complete single pass cut on something 1 7/8 wide isn't exactly easy.
I've also noticed I have a much easier time edge jointing thicker stock with the 32 inch long x 3 inch wide planes compared to 24 inch long x 2 inch wide planes. Getting the edge square to the reference face is easier with the bigger plane...'least for me it is. Couldn't say if it is the extra length or the extra width or the extra mass or any combination.
Sharpening those irons is a bear....and I have Hippo stones (but not exactly a huge amount of sharpening skills... ;- ) ). I have newly found respect for those craftsmen who are pulling full length 6 (or so) inch wide shavings in the japanese planing contests. Can't imagine how they're able to sharpen those irons so straight and to such a refined edge!
Tim
yeah, but....
Tim of Livermore
>Certainly didn't say that - I - could do so. :- 0!
is it the tool that does the work or the person wielding the tool?
Tim
It's the partnership
Bill Houghton, Sebastopol, CA
>A competent mechanic with a carrot peeler can't make a piece of furniture; neither can an incompetent one with a Steve Knight plane. It's the combination of good worker and good tool that does it.
which is more important?
Tim of Livermore
>A skilled craftsman can compensate for a poor tool. A highly refined tool cannot compensate for a poor craftsman.
I do agree - there is a great partnership between ourselves and our tools. A very well made tool helps a craftsman excell at their work. A poor tool can easily lead to frustration.
Tim
Re: which is more important?
Pam Niedermayer - Austin, TX
>My theory is the more experienced the craftsperson, whether woodworking or software or engineer or whatever, the poorer the tool quality can be. Beginners need some great tools to work into whatever. Of course, it seldom works out that way. Beginners often don't know how to evaluate tool quality or even what types of tools they need.
Pam
I resemble that remark!
Steve Kubien
>I couldn't agree with you more Pam. When I was reeeeeally new to handtools, I didn't know good from not so good or what tools I needed. Since then, I've found a few 'go-to' tools which are never far out of reach. I now spend less (in total) on tools now but more per tool to get what I want.
Steve Kubien
-trying to get past the (perceived) gizmo-effect of some tools