Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.
Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Combination Press Plough Plane

Knowledge Base Version 2.0 *LINK*

Posts

Knowledge Base Version 2.0 *LINK*

#1

Knowledge Base Version 2.0 *LINK*

Rob in Peoria

>The new version of the Hand Tool Knowledge base has been posted at the link below. I have broken the links up in to individual pages by subject and the root address is now just an index to all the other pages.

As always, please ping me with broken links, and especially appropriate pages that I've missed.

For anyone who hasn't seen this yet, it's my shot at giving back to the hand tool community. I'm essentially trying to make a card catalog of helpful articles on hand tooling found all over the Internet.

Thanks for looking.

Rob, playing in Peoria


Hand Tool Knowledge Base

Re: Knowledge Base Version 2.0 *LINK*

#2

Re: Knowledge Base Version 2.0 *LINK*

Rob in Peoria

>Try this link (Ellis, is there any way to edit a posted message?)


Hand Tool Knowledge Base

Re: Knowledge Base Version 2.0 *LINK*

#4

Re: Knowledge Base Version 2.0

William Duffield, on the Cohansey

>OK, we fixed the link in the original message. Yes, these things can be fixed, but only if you have Admin capabilities.

Thanks for providing this compendium of very useful information.

Re: Knowledge Base Version 2.0 *LINK*

#5

Great stuff, Rob, many thanks.

Pam Niedermayer - Austin, TX

>

Re: Knowledge Base Version 2.0 *LINK*

#6

Steve Kubien

That's fantastic!

Steve Kubien

>Great work Rob! You've performed a huge service for all of us, regardless of skill level.

Thanks,

Steve Kubien

Re: Knowledge Base Version 2.0 *LINK*

#7

This is great Rob...

Scott Burr in Ben Lomond CA

>Thanks so much for putting it together. I did find the brace and drill section well...boring;^)

Great job and thanks again!

Re: Knowledge Base Version 2.0 *LINK*

#8

Ellis Walentine

No edits, but...

Ellis Walentine

>...a moderator is never too far away. I checked, and the link works in both your posts. Perhaps William or Ted or Dan has already fixed the URL for you.

It is possible to configure the boards so that you can delete a post you have made, but only if you have a password set up. Since we have never required passwords or registration or profiles, I figured one size would not fit all, so I have never activated that feature. I don't think anyone really misses it.

Ellis

Re: Knowledge Base Version 2.0 *LINK*

#9

Bravo! Thanks!

Jorge Castaneda ~ Downeast Maine

>

Re: Knowledge Base Version 2.0 *LINK*

#10

Traditional Woodworking Resources on the Web *LINK*

Jonathan Peck - N.Y.

>Great Job. Here is another resource worth looking at


The Electronic Neanderthal

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.