Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Heat Planning

Posts

Heat Planning

#1

Heat Planning

Richard Gillespie

>Spent the day working on 16 adjustable shelves. I glued them up from 7/8" stock I bought already planned 2fs with one edge jointed.

Ran out of sandpaper so I decided to use my hand planes to flatten the shelves. The trash can is now 3/4's full of curlies and my arms feel like I've been doing push-ups all day.

I've always had problems reading grain directions so I got a real education today. What a surprise to find that a flat sawn board can have the grain running two different directions on either side of center. In addition to that, some boards the grain direction changes and you may have to plane a portion of the board in one direction and the other the opposite direction.

I used several different jack planes and a fore plane on the project. Next step is smoothers. I have several to choose from including a wooden coffin smoother. We'll see what gives me the best results. On many boards I've got tear out that I have to contend with.

I'm going to try to sand as little as possible. I intend to use planes and scrapers to finish the wood as much as possible.

Wish me luck.

Re: Heat Planning

#2

you got it made.

Ernie Miller

>sounds like this is the day you had that light bulb go off. I see the road going down hill alot steaper from here.


img