Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Rob Lee - Do you carry Pin Pushers

Posts

Rob Lee - Do you carry Pin Pushers

#1

Rob Lee - Do you carry Pin Pushers

Andrew F in Australia

>Something that I can use to drive panel pins into moulding without using a hammer? - They look like a hex-drive screwdriver but have a spring loaded shaft (with about 25mm/1" of travel) surrounded by a sleeve at the business end of things - tip of the pusher shaft is magnetised to hold the pin in place.

You put the heel of your palm/ball of your thumb onto the back of the handle, locate the sleeve where you eant the nail to go and simply push the nail/panel pin into most timbers.

I know that you are probably aware of what a pin pusher is (telling g'ma how to suck eggs), but included the description for those that aren't familiar with the beastie.

Anyway, do you carry one (as a quick glance of your catalogue proved fruitless?)

They're about the easiest way to deal with panel pins that I know of.

Cheers,

Andrew

(with a potential job involving hanging crown moulding off skyhooks and installing the same, preferably without using a hammer)

Re: Rob Lee - Do you carry Pin Pushers

#2

typo - 'want', not 'eant': missed it by "that much

Andrew F in Australia

>

Re: Rob Lee - Do you carry Pin Pushers

#3

are 18ga brads acceptable?

Ian in Sydney

>WARNING what follows involves the destruction of electrons

Andrew

If 18ga 'C' type brads are not too big you can borrow my electric bradder. It's a Meastro and will drive brads between 16 and 32mm long.

If you want to borrow it call me Saturday to work out the details.

Ian

Re: Rob Lee - Do you carry Pin Pushers

#4

Re: Rob Lee - Do you carry Pin Pushers *LINK*

Rob Lee

>Hi Andrew -

Yes we do - link below!

Cheers -

Rob


Brad Push

Re: Rob Lee - Do you carry Pin Pushers

#5

Thanks Ian

Andrew F in Australia

>I've got to win the quote yet (but the client's sounding v. positive)

Will call you in a few weeks.

Cheers,

Andrew

Re: Rob Lee - Do you carry Pin Pushers

#6

Re: Rob Lee - Do you carry Pin Pushers

Andrew F in Australia

>Hi Rob,

Thanks for the reply - I was tired when I wrote the initial query and forgot social niceties such as 'please' and 'thankyou.' Not intentional on my part.

I'm in the process of ordering a couple.

Cheers,

Andrew

Re: Rob Lee - Do you carry Pin Pushers

#7

Does that make you a brad pusher pusher?

Dave Louw, Bellevue, WA

>

Re: Rob Lee - Do you carry Pin Pushers

#8

Bought one of these, never have used it

Bill Houghton, Sebastopol, CA

>(though I doubt the postage is cost-effective between here and Oz).

I like the concept, but have yet to find a brad small enough to fit the little opening.

Re: Rob Lee - Do you carry Pin Pushers

#9

How about the brads or pins used in air nailers?

Garrett in Victoria

>

Re: Rob Lee - Do you carry Pin Pushers

#10

Jack Guzman from Maine

I have one of those

Jack Guzman from Maine

>I have used mine for several years now.I like it because it holds the brads with a magnet and you can set then by striking the steel button if hand pressure isn't enough.Plus,with this I never drop my brads or hit my fingers.---Jack

Re: Rob Lee - Do you carry Pin Pushers

#11

I'll have to try that - good idea

Bill Houghton, Sebastopol, CA

>