Hock Chipbreaker and Lever Screw
Jeff Schmidt (KY)
>Does the use of a Hock chipbreaker with a Hock iron necessitate a longer lever screw? If so, where does one find one?
Hock Chipbreaker and Lever Screw
Posts
Re: Hock Chipbreaker and Lever Screw
#2Re: Hock Chipbreaker and Lever Screw
Tom MacGregor
>I have put a Hock iron in a 60-1/2 block plane and in a #8 and iron/chipbreaker combos in a 4-1/2 and a 604. None have required longer screws.