whats this?
Mike Ellington From the Arch City
>It has this inscription. Snell & Atherton on one side and the other side it has OED letter 8
Mike Ellington
Start with 10 end with 10
Knowledge You Can Build On — Est. 1998
whats this?
Mike Ellington From the Arch City
>It has this inscription. Snell & Atherton on one side and the other side it has OED letter 8
Mike Ellington
Start with 10 end with 10
Re: whats this?
Derek Cohen (in Perth, Australia)
>Mike
I believe it is a spokeshave used by shoe repairers.
Regards from Perth
Derek
Shoe Repairers?
Mark Harrison -- in Sydney, Australia
>Interesting! I have a very similar one as well but the iron is too far gone and pitted to use so I've never tried. I have long thought that this was not one of my better purchasing decisions now you have confirmed it.
I wonder what a shoemaker would do with one of these?
Re: Shoe Repairers?
George in Lowell, Mich.
>My guess is that they used them to carve out the concave area in a shoe's heal. I have 2 of these with different radiuses.
George ( in snowy Lowell, Mich. )
Re: Shoe Repairers?
Todd Hughes
>Is called a Heel Shave.A pretty common tool. In Salaman Dictionary of leather working tools he says there were 15 different curvatures and the purpose of the tool is to trim the sides of the heel. First devoloped toward the end of the 1800 lots of shoemakers considered it new fangled and who thought they could do the job better with just a knife. Using the shave made it easier and took less skill....Todd
Re: Shoe Repairers?
Mike Ellington From the Arch City
>I'm just amazed at the knowledge that is on this forum. To Ellis.... This is what the Internet is about Thanks.
My first thought that it was a spoke shaven for wooden bowel making? The cutting blade is removable for sharpening. I wonder If David Marks has one when he forms some of the curves on his wood art?
Oh, no...
Scott in Douglassville, PA
>Lowell on a Roll! My dad usd to live just down the road from you. That antique mall still there? Small world...
Re: whats this?
Paul M. in San Diego
>I have one just like it. I was hoping to use it as a poor-mans travisher, but this is a real pain to try to sharpen. I got this somewhat sharp, but nowhere near sharp enough to work on wood. The curved inside bevel means you have to have a matching curvature dowel, and a way to hold the blade while sharpening. There are only little bitty flats on the ends of the blade, so there's not enough to even hold onto very well to sharpen. Mines gaining further patina in a drawer. ;-)
Re: whats this?
Mike Ellington From the Arch City
>Thanks Paul. I see mine will be gathering dust also.
Re: Oh, no.../Oh, yes!!
George in Lowell, Mich.
>Yes, it's the Showboat City!!
The Flat River Antique Mall is where I bought my $12.00 type 10 Stanley 10 1/4! ;^)
I've lived here all my life.
George Allchin
Re: whats this?
sharon
>Hello I am sure you have your answer by now, but I will acknowledge your question just in case.
The tool is called a spokeshave tool, more than likely it is made by Snell & Atherton I think they were in located in Mass, and this design may date back to the 1800s. Hope this helps Sharon
Re: whats this?
Ernie Miller
>I just bought some in Canton thinking they were for woodworking and found out that they are Skivers for working leather. Hope this helps.