I am havin' some fun now......

Ooppsss...above with lots 'o pics...NM

Terry Hatfield

>

Re: I am havin' some fun now......

Don Thompson - Cutler Ridge, Florida

>Looking good! Now you need to start working on shoulder planes, rabbet planes and combination planes.

Report back when that drawer is complete. ;-)

Re: I am havin' some fun now......

Terry Hatfield

>Thanks Don!!! I have the LV medium shoulder plane in my sites right now. It will be next to join the group. :o)

Terry

plan B?

Ernie Miller Topeka

>You are new arent you! scratch that start thinking about plan Z! as you have alot to learn. Are you aware of push drills? Do you have a drawer of chisels so big that you will never use them all? I want to see that picture of you when the light bulb goes off in you head just befor the anvil drops. (Wilie E CyoTie)(Tool Collector)

Gonna need a bigger drawer

Bob Hackett

>on second thought make that a bigger bench with more drawers.

No actually,the wall will do nicely.That way both you and visitors can appreciate the new tools on a daily basis.

What`s that?What about the pegboard and tablesaw blades,jigs,etc on the wall already?

Let`s start over.What you need is a bigger shop.One big enough to divide into power and hand tool/quiet side shop space.See Ernie for instructions and helpful pics.

Mainely,Bob-Who still knows how to play "crack the whip" when a new guy latches on to the end of the line.;^)

Welcome aboard Terry,please step directly to the edge.This won`t hurt a bit(it may damage your wallet though).

Plan 2K

Steve Kubien

>2K as in 2000...pounds that is. Aren't there a few around here that have an anvil collection? C'mon, fess up!

Steve Kubien

Welcome to the slippery...

Scott Burr in Ben Lomond CA

>Slope. Nice looking planes but, you�re still missing some. As said approach the edge and jump. I see a plane till in your future�

Gotta have...

Scott in Douglassville, PA

>...gas springs on it, though... ;)

;-)

Scott Burr in Ben Lomond CA

>

The reason they call it Plan B

Bill Houghton, Sebastopol, CA

>is it's named after me. See, what you do is pack up every plane that won't fit in the drawer and store it at my place.

Nice plane, Terry - and a nice starter kit.

I think you are onto something....

Terry Hatfield

>DAn,

That pegboard just might have to bite the dust and get replaced by a nice ahnd tool cabinet...with expansion room. :o)

t

Re: plan B?

Terry Hatfield

>Ernie,

Ya I know. This is one serious disease. I remember looking at you guys at the breakfast in KC last year like you were nuts!!!! Now look at me...I'm nuts too!!

BTW...are we gonna get together before the show again this year?

t

I way ahead of you Scott.....

Terry Hatfield

>I have already approached and jumped!!!

t

Re: The reason they call it Plan B

Terry Hatfield

>Bill,

Thanks!!! I have recieved a few offers to store my extras all ready. :o) I really am thinking about removing some peg board and building a nice cabinet. Lord knows I'm gonna have to buy more so I might as well have a "shrine" to put them in. :o)

t

Crack has to be safer.

Gerry Doll

>Looking at the pics above and thinking this is after a only few months time.

Gerry

Wondering how many planes can fit in the old van down by the river?

Re: Crack has to be safer.

Terry Hatfield

>Gerry,

Don't know about safer but it's probably cheaper!!!

t

Crack has to be safer.

Gerry Doll

>Looking at the pics above and thinking this is after a only few months time.

Gerry

Wondering how many planes can fit in the old van down by the river?

Re: Crack has to be safer.

Todd O. Cronkhite Maine Native in FL. Exile :~(

>Terry,

your collected wouldn't even make a scratch in a scratch on the surface of the new world in which you have entered. Have you otderws your LN booklet yet, or a LV, subscribed to Patrick Leache's e-mailing list, seen what Steve Knight has to offer, or ChesterTool Works, or, or, or, or? ;~)

'tis funny that a year ago you thought we where nuts and now your one of us. Do try to keep it to your self tho as we don't need the hordes driving up the price of old tools now do WE?

Todd O.