Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

holdfasts

Posts

holdfasts

#1

holdfasts

mike muzzarelli

>How much oversize should I drill the holes for my holdfasts. Got a small and a large from Woddcraft and would like to try them.

Re: holdfasts

#2

Re: holdfasts

Mark Harrison -- in Sydney, Australia

>I have the same holdfasts. I just used a 3/4" hole for both but this was in chipboard and pine (my excuse for a bench).

If this is hardwood you might want to go a little bigger for the larger holdfasts but the small ones will work fine with 3/4".

Re: holdfasts

#3

Re: holdfasts

Michael Stadulis, in Gloucester County, NJ

>Hi,

The hole should be just slightly larger in diameter so that the holdfast slides up and down without any effort at all. You don't want any friction, so I'd guess that the bench holes for mine are 1/8 to 3/16" greater in diameter than my holdfasts. As soon as you whack it down on something, it will lock up.

Mike

Re: holdfasts

#4

Re: holdfasts

David Miller from Iowa

>It also depends upon the thickness of the bench. Try a test case first