Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Workbench finish

Posts

Workbench finish

#1

Workbench finish

Andy F.

>I recently came into a Dieffenbach workbench which, according to the information I have, was factory finished with "hot wax" rather than oil as I would expect. I want to maintain the finish, but I'm not sure what to use. The US distributor was not knowledgeable, the manufacturer's web site has no info on the subject, and their customer service only speaks German. Any advice would be appreciated. Thanks.

Re: Workbench finish

#2

Re: Workbench finish

Peter Berglund in Denver

>I finished mine with 1 part each of beeswax, turpentine, and BLO. Warmed, it goes on a lot easier and penetrates better. I would guess 'hot wax' is either that or a factoryized version thereof.

Re: Workbench finish

#3

Re: Workbench finish

Mike Real from Pittsburgh

>Ummm, BLO? I recognize the first two, whats BLO? Always looking for new recipes ;-)

Re: Workbench finish

#4

Robert Tutsky

Boiled Linseed Oil

Robert Tutsky

>