Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Glue recommedations for cold weather

Posts

Glue recommedations for cold weather

#1

Glue recommedations for cold weather

CJ McLaughlin

>Any ideas for cold weather glue. I'm thinking that good ol hide glue would be the way to go. I can warm a bottle up in a hot water bath (I'm sure I can liberate the crock pot for the traditional stuff just yet).

Working in the house isn't an option and I'm not keen on using a heat gun to 'warm up' the wood.

Any thoughts?

Chris

Re: Glue recommedations for cold weather

#2

Re: Glue recommedations for cold weather

Chad Boehlke

>I use Tibond glue by Elmers. My shop is in a un-heated building and the wood glue has held up so far. Its about $5.00 a bottle. Other woodworkers might use other brands.

Re: Glue recommedations for cold weather

#3

Re: Glue recommedations for cold weather

John, NY

>I find Titebond II will withstand 3 freeze cycles, after that it goes kinda granular. To circumvent that I have a wood cabinet with a couple of ordinary 60W bulbs in. one bulb works from Dec thru March and the other supplements January/February when its cold. I keep all of my yellow glue and large quantities of epoxy etc in the cabinet. My switching is manual, I haven't got to the stage where I have an auto thermostat.

Problem I have is more with drying, yellow glue goes kinda chalky if it isn't warm enough. Means I have to leave the heating on in order to get stuff to dry...

Re: Glue recommedations for cold weather

#4

Re: Glue recommedations for cold weather

Tom Ryan

>The current Tools and Shops issue from Fine Woodworking has a review of Titebond III by Chris Minick. He likes Titebond III in part because it behaves better at low temps. He stopped using Titebond II because the chalk-point was 55 degrees, and his Minnisota shop got colder than that; Titepond III has a much lower chalk point.

Re: Glue recommedations for cold weather

#5

Re: Glue recommedations for cold weather

Bob Smalser

>I generally don't use aliphatics and prefer urea resin and other repairable glues...but resin likes it warm.

The alternatives include space heating a small space or a drying box through setup, or wrapping the piece in an electric blanket, an old trick we used to use when using resorcinol (even more temperature sensitive) in cold weather.

Poly seems to work fine in our local cold weather and so does epoxy using a "hot" hardener. Just slower, so the clamps get left on over night.

Re: Glue recommedations for cold weather

#6

Re: Glue recommedations for cold weather

steve knight

>I know yellow glues and poly about 55 is the minium temp for drying. even if you warm the glue up the wood is cold. my last shop had no heat and I had to glue up cold wood with ply. if I was nto really carful claming the clamps extra tight they would fall off after the glue spread out more.