It gets worse.
Gerry Doll
>Still in the process of attempting to learn how to flatten the backs of chisel and plane blades (keep dubbing the outside of the leading edges), ruined a couple of chisels, managed to make all 4 sides of a 200 grit waterstone true to themselves but out of wack with all others.
Current work in progress:
1. Tuning a new #4 record.
2. Fixing my mistakes in tuning a #5 Anant.
3. Tuning an Indian # 78 knock off.
4. Tuning a WW II Bailey 6 with an out of wack sole.
5. Flattening and sharpening a set of LV chisels I made a hash of.
6. Flattening and sharpening a small set of marples bevel edge.
7. Filing the pins on a crown mortise gauge.
8. Truing the side of the above-mentioned waterstone ( Any suggestions?)
9. Tuning 2 new stanley blocks. ( bought from the big orange box)
The top of my work bench, for the last 6 months has been covered by a lapping plate, various grits of lapping powder, 3 or 4 sheets of plate glass, a 25 lb stack of sand paper ( 80 to 400), waterstones (200, 1000, 6000), a DMT plate, feeler gauge, and books on sharpening (Lee, Lee_Nielsen, fine woodworking).
The top of the bench ( cheap plywood construction) is ruined with embedded iron shavings and mud from the waterstones.
The only plane in any decent shape is a #7 that was bought tuned. (Qudos to Walt Q!)
The wife is beginning to think I've lost it, the kids can't recall my name, and I don't think I'll be able to fit all this in the van.
Gerry
Thinking about leaving ww and taking up something simple, like quantum physics.