Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Building a Japan/American Plane

Posts

Building a Japan/American Plane

#1

Building a Japan/American Plane

Chad Boehlke

>Iam building a plane that is a Japan style plane, but its 2 1/2" tall so that Westerners can hold on to the body as they pull it. A woodworker in CA. works with Japanees tools and always had a problem holding on to it. Well I started on it last week. After its done I will post a photo of it. Has anyone built something like this?

Re: Building a Japan/American Plane

#2

Re: Building a Japan/American Plane

steve knight

>I beat you too that (G) but it is a good idea and makes the plane easie to use.

Re: Building a Japan/American Plane

#3

Ellis Walentine

My only question...

Ellis Walentine

>...is what does your design do to the center of gravity of that plane? I know that my SUV has a warning to watch out for rollovers. :-)

Seriously, in general, I believe in keeping the cutting force in line with the cutting edge, to whatever extent possible. A higher body might incline you to inadvertently apply a side-levering type of force when pulling, thereby negating one of the great benefits of Japanese planes.

Just a thought. I'll be interested to hear more.

Ellis Walentine

Re: Building a Japan/American Plane

#4

Re: My only question...

Chad Boehlke

>I bult a prototype and it dose rock a litte, but while useing it, I notice I havt to slow down and make sure it is square on. It teaches a person to be more carefull on being square.

Re: Building a Japan/American Plane

#5

Re: Building a Japan/American Plane

Pam Niedermayer - Austin, TX

>I've never seen anyone have problems holding a Japanese plane, out of probably 40 people. And if you add in Gordon, Mujingfang (sp?), and the like, there are many more who regularly use low slung planes.

Pam

Re: Building a Japan/American Plane

#6

Re: My only question...

steve knight

>the base may need to be a bit wider is all. I have made planes that are a lot of different hights. othe only complaints I ahd gotten where when I was beveling the sides so only the ipe sole touched the wood.

most likly the body of a japanese plane was built around the blade. longer blades were far harder to make. I know since it was a battle to get longer blades made. it caused all kinds of problems.

Re: Building a Japan/American Plane

#7

Re: My only question...

Chad Boehlke

>I have the base as 2 3/4" wide by 2 1/2" tall. Thats what the person wants so he is willing to try it. Diff. question, do you use floats? I have been useing blunt "scrapers" that has been working very well, one other old timer plane maker uses the same thing, I can't think of his name.

Re: Building a Japan/American Plane

#8

Re: Building a Japan/American Plane

Chad Boehlke

>Well this person wants it. My prototype is easy to hold on to. I don't have a Japan style plane, so Iam not sure how they operate. I like the over size.

Re: Building a Japan/American Plane

#9

Re: Building a Japan/American Plane

Pam Niedermayer - Austin, TX

>You typically place your boss hand on top of the plane and secondary hand behind the dai, then pull.

Pam

Re: Building a Japan/American Plane

#10

Re: My only question...

steve knight

>I have flat end scrapers or sharp files for inside work. my plane designs don't need much inside work though.