Pat reasurch web page

10/7/04, 6:46 PM #1

Ernie Miller
Guest

Pat reasurch web page

Ernie Miller Topeka

>What is the address to that patent resurch web page? I was playing with these deviders I bought today and they have a brass knob on the end of the compas so I was spinning it I thought it was to take them apart but NO it is a micro adjuster really neet has a spring in there and gives you about 3/8" of adjustment it's made by W.S. co New Haven Con. any one know this company? I want to try and look it up. Thanks Ernie

Re: Pat reasurch web page

10/7/04, 7:24 PM #2

Dan Donaldson
Member
Offline
5,264 posts

Registered: 9/17/01

Try this *LINK*

Dan Donaldson

>

Patent office

- - -

I have been woodworking for about 25 years now, and would consider myself an enthusiastic amateur. My claim to fame (or infamy) has always been fixing stuff. I spent time in the Air Force in the 60's then went to work as an electronic technician for civil service. I finally got my EE, and being fed up with the civil service nonsense, took a job with Ford Motor Company until I went with the split to Visteon last year. I got interested in music and started playing in a bluegrass band. I wanted a new guitar, and that kind of led me into woodworking. I bought some books, a few tools, and built a guitar. Luckily, I didn't know any better than to try that as a first ever project. I still play it when I get a chance, so it must not be too bad if it can live for over 20 years. After a stint in Mexico for my job, I moved into a new house and built a small shop. Since then I have been collecting tools and skills, probably more of the former than the latter ;-). Finding this site has done more for my skills and enjoyment than anything else. I have learned a lot and really enjoy the friendships that I have made here. I have been married to LOML (Lori) for 32 years now and have 6 kids. When they are all gone, I want to get a 1 bedroom house (so there is not room for them to move back in) and at least a 6 car heated/air conditioned garage for a shop. (Dream on...)

Re: Pat reasurch web page

10/7/04, 8:25 PM #3

Ted Shuck, Centennial, CO
Guest

Re: Pat reasurch web page *LINK*

Ted Shuck, Centennial, CO

>Ernie,

Are you thinking of DATAMP? Directory of American Tool and Machinery Patents. They don't have everything here, by any means, but there is a lot and it is easier to search that the USPTO database.

Link below...

Ted

DATAMP

Re: Pat reasurch web page

10/8/04, 8:25 AM #4

paul womack
Guest

Re: USPTO searching

paul womack

>odltools 1

oldtools 2

oldtools 3

oldtool 4

Heavy going, but good stuff.

BugBear

Re: Pat reasurch web page

10/11/04, 2:30 PM #5

Steve
Member
Offline
58 posts

Registered: 3/27/04

Re: Pat reasurch web page

Steve

>Try Willian Schollhorn Co, they made dividers in New Haven. This link gives a little information, and links to more:

http://archive.oldtools.org/archive_get.phtml?message_id=132981&submit_thread=1#message

Regards,

Steve

Pat reasurch web page

Posts