Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

From Stone to Dust to Stone?

Posts

From Stone to Dust to Stone?

#1

From Stone to Dust to Stone?

Todd O. Cronkhite Native of Maine

>Finally finished scraping that sandstone into being round again this weekend. I saved all the dust from the scraping, and am wondering if I can somehow take this dust, mix it with some type of bonder and make a benchstone out of it.

I've got about a 1/3rd of a freezer Ziplock bag of the dust.

I had to sweep and dust the shop for several hours as I had a coat of dust everywhere from this job. there is no tellin' how much I ingested as I didn't wear a dustmask. I lost track of my accumulated time, but I spent either 10 0r 11 hours doing this shredding one pair of cheap leather gloves in the process. It was worth tho as now it turns 'round and 'round so prettily with no sign of wobble and the face is nice and square instead of having that deep groove like it had. I'm just pleased as punch with myself for resurrecting this stone.

Todd O.

Re: From Stone to Dust to Stone?

#2

Re: From Stone to Dust to Stone?

David Miller from Iowa

>Good job on the rehab. The dust recycling idea is interesting, but seems like a a lot of effort. The grinding wheel is probably more for setting the bevel and the you may want finer stones for honing.

Re: From Stone to Dust to Stone?

#3

Re: From Stone to Dust to Stone?

Todd O. Cronkhite Native of Maine

>Thanks David, I feel really good about rehabbing this stone, and once I get a tool rest built for it I am going to show it to the old man that gave it to me. I'm gonna make a tool rest just like the one on a Tormek, and one for more in the center of the wheel as well. Had this brilliant brainstorm last night. Fiqured I could just make new supports that are just a little taller than the wheel and put in a crossbar of 3/4" dowel. Yup, poormans Tormek, I love it.

Yeah, yuo're right. this stone is for primary bezel grinding and not for finishing an edge.

Alot of effort? BAH! You're talking to a guy who took down a huge Oak tree with nothing but a bowsaw, ax, sledge hammer and wedges and a one man crosscut. Took about 3 months but from standing tree to firewood pile not one electron nor drop of fossil fuel was killed. I lost a few pounds of fat and gained a few pounds of muscle in the process to boot. Effort, HA! I laugh at effort, and sometimes even try to think up harder ways to do things, which is hard to do as I usually find the hardest way to do things easy enough as it is. ;~)

Todd O.