WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

A little Holtey for y'all (*LINK & PICS*)

Posts

A little Holtey for y'all (*LINK & PICS*)

#1

A little Holtey for y'all (*LINK & PICS*)

WoodburnBob

>So...

I've been invited to be the guest of honor at a nearby Late-Summer Polyp Harvest, which convenes in just two hours. With time to kill, I surfed old visions...my life passing before my eyes...and dropped into the newly buffed Holtey site.

Holtey Site

Nothing new to most of you, but this illustration caught my eye.


If you follow the "planes" tab on Holtey's homepage to the "98", you'll see more of these amazing "CAD" renderings.

I've never seen anything like them before and thought a few of you might enjoy visions from the afterlife.


If I had more time (and isn't that what we too often say) I'd hope to ask the close observers among you what you make of the intermediate design/layout circles whose segments define sections of the "cheek" profile. Very esoteric stuff, in that the underlying form of all the old infill "cheeks" I've inspected are not circular. Rather they are some sort of involute. I say involute because I don't know the correct term for that group of curves that include involutes. None of this is to say I think Mr. Holtey does or should intend to mimick design elements of the old masters.

Forgive me the artificial prose and the melodrama, I was reading Proust last night and I'm anxious about the outcome of today's festivities...and afterall, who else do I have to turn to at this moment.

Re: A little Holtey for y'all (*LINK & PICS*)

#2

Nice renderings...

Scott Burr in Ben Lomond CA

>Those are sweet! Thanks for posting them.

I'd call them b-splines myself. In the older plane sides they used them or possibly ellipses (or conics). Ellipses have always been "big" in design motifs. The esoteric of his curves give the same �look�. If you follow his curves or radii they all intersect in tangent. Thus giving you �that look� in an easy to machine form.

Re: A little Holtey for y'all (*LINK & PICS*)

#3

b-splines

Ryan Stagg -- Cincinnati

>I'd be shocked if the curves weren't represented internally as b-splines (and even more probably NURBS). But I think that the use of circles to define a curve as is shown in the rendered drafting diagram would be called an osculating circle.

A literal representation of a b-spline curve would include some sort of polygonal control geometry (i.e., some sort of box that vaguely defines the general shape of the curve).

Re: A little Holtey for y'all (*LINK & PICS*)

#4

Hey, isn't that the new LV LA plane

Frank D. in Montreal

>without the dimples for the fingers? Boy, that Rob Lee sure is quick to please customers. Really looks a lot better without them.

Frank

Re: A little Holtey for y'all (*LINK & PICS*)

#5

Your right!

Scott Burr in Ben Lomond CA

>I totally forgot about NURBS. Thanks also for refresher of the proper terms.

Re: A little Holtey for y'all (*LINK & PICS*)

#6

Nope, too many zeros in the price!

Neal (San Jose)

>

Re: A little Holtey for y'all (*LINK & PICS*)

#7

Re: cheap - NOT dovetailed!

paul womack

>

Re: A little Holtey for y'all (*LINK & PICS*)

#8

His cheap, not ours

Art Geiger

>Yeah, but not our cheap, just his. Cheap SKATE, yes, and the 98 is his only offering under $5000 except a miniature mitre plane. When you consider you are paying the guy by the hammer blow there's always room for a short cut, and this plane is it - hell of a way to stop the onslaught of tennis elbow.

Some say he's being innovative and challenging the traditional dovetailed plane joint. Yeah, right - that's just the Holtey spin duping you chumps. The interlocking dovetail joint was constructed into planes to produce maximumim strength in a plane body - fact. Cut through the Holtey smoke screen and you'll see that his 98, where projecting studs in the sole plate are riveted to the sides, more than half the metal in the body isn't even joined mechanically at all.

Re: A little Holtey for y'all (*LINK & PICS*)

#9

Closure OT

WoodburnBob

>Yesterday I had colonoscopy. Three years ago I was browbeaten into "routine" sigmoidoscopy...based purely on my age! A small adenoma was biopsied but not removed. Told to have a colonoscopy to removed it and inspect the rest of the colon, I put off said colonoscopy a little. That is to say, I stalled indefinitely.

From what I hear there are oodles of guys my age who are "putting off" colonoscopy. Who can blame us.

The three days of diet change and laxatives are part of it to be sure, but there must be countless fears and rationalizations behind such widespread dawdling. Indeed, why should such actions of denial and avoidance necessarily be the obedient product of careful thought and reasoning? Few of my other actions are.

Anyway, the procedure itself was stunningly easy and comfortable. In and out in about 90 minutes by the clock. I was conscious perhaps 15 minutes and asleep the rest of the time. Very restful and pleasant actually. Fentanyl and Versed!

Two benign polyps removed. Story over. He shook my hand and said, "Come back in 3 years. Have a nice day".

Guess I won't be needing to sell off my plane collection just yet.

Re: A little Holtey for y'all (*LINK & PICS*)

#10

Re: Closure OT

Don Thompson - Cutler Ridge, Florida

>I am glad to hear that everything came out all right. ;-)

My doc wants me to have one, but he said to wait until after October 19th (then I turn 50 and the insurance company will not be cranky about the need). I must admit that I am not overly thrilled at the prospect. :-(

Re: A little Holtey for y'all (*LINK & PICS*)

#11

Well at least

Scott Burr in Ben Lomond CA

>It was somewhat tolerable. Glad to hear you pulled through like a pooper err...trooper, yea that's it;)!

Re: A little Holtey for y'all (*LINK & PICS*)

#12

Glad it was Good News on the 'Closure'

Raymond in Trenton NJ

>In addition to that good news Bob, look at the bright side, next time someone tells you to 'get the lead out' you now have scientific proof that you already did :o)

Raymond

Re: A little Holtey for y'all (*LINK & PICS*)

#13

Re: Glad it was Good News on the 'Closure'

Todd O. Cronkhite Native of Maine

>Colonoscopy? Pylops? Gads, I don't wanna even think of it. I'm 42 now, and I think I'll just hold at that.

Glad that all came out of, I mean in the end for ya' tho. ;~)

Todd O.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.