Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Had a ROCKIN GOOD WEEKEND!!!!!

Posts

Had a ROCKIN GOOD WEEKEND!!!!!

#1

Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>Man o man what a good weekend I met up with Roger nixon and about a 1/2 dozen other knuckle draggers and played with hand tools all afternoon long Saturday it was a blast! talked played played ate talked played. oh ya it was fun. I cut the DT's for another drawer for my bench I thought we were going to have some sort of contest so I could get them all finished but NOOOO I was the only one cutting them except Roger did do a couple tails on the drawer nuff said there. Sunday I spent some time cleaning the nander shop I hung some more modular shelves over the small bench that sets against the wall while the bench was out of the shop. ( I took it to the nander get together) So I took a picture then I took some more. I guess I came up with a mini shop tour so I will start with the new shelves. The new ones are the two long ones the short ones have been there foe awile but most of you haven't seen them either. There is room for two more long shelves to be added if they don't interfear with the bench. they won't be added untill the bench comes back down.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#2

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>Think I will spin counter clock wise This is the shelf of molding planes and a small parts rack along with the clamp storage.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#3

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>A little further to the left is the wall of braces I try to keep one for every size bit but all the bits arent installed yet. there is also some saws and misc on this wall.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#4

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>Here is the south wall more planes saws chisels and stuff.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#5

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>So next is the east wall eggbeaters hammers files awls and rules.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#6

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>next in line is the lumber rack toucked in under the stairs down to the cave. it also showes the post drill.


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#7

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>in the last corner is the shelf that holds the box of carving chisels and a wall with misc tools draw knives and what not's


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#8

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>here is a close of of the wall of eggbeaters I want to get one for every bit upto 1/4'


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#9

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>One last picture it is of the morticing bench burried there under the drawers from the apathacary chest drawers that holds hardware. they need carried back up to the power shop or the chest carried down? which will it be?


img

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#10

Serves ya right...

Roger Nixon

>that my dovetails were so ugly. Talk about nerve, bringing work to play day!

I was worn out before the day was over but it sure was fun! Thanks to Randy, Scott, & Bill for coming and especially to Jr. for bringing his workshop on wheels and to Rob for providing the shop and his cool bench.

Nice shop tour BTW, Ernie.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#11

Re: Serves ya right...

Ernie Miller Topeka

>When is some one going to post group shots? I looked on you site but there were none to steal.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#12

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Bob Hackett

>Looks like Ernie got a new camera.Nice shop tour.

Glad to see Steve K isn`t the only one working out of a "Tool Bunker".

Mainely,Bob

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#13

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Mike Lietzow

>Great looking shop Ernie. Your photos are timely as I'm fixin' to set up my shop soon and I need all of the inspiration I can get. Nice rack of molding planes too. One critique if I may; you gotta get some better looking eggbeaters, at least an earlier M-F #2.

Cheers,

Mike

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#14

Re: Serves ya right...

Rob in Kansas

>I'll say it's my fault. I thought we were going to have some how-to demo's. I got the tails cut on one joint, but had to stop to go check on something...can't remember what.

Boy was I tired that night! By the time I prepared for my outing Sunday I basicly just went home and went to bed.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#15

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>If I get somthing to nice I allways end up selling it All I need is function. There is a pile of them on the floor that need some place to hang and Then there is a box of them that are in need of parts or need to donate parts. I think I need tobuils another rack as that one has no more room. But the bench is empty for the most part so room will be opening up. I will do a bench tour when it is finished.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#16

Steve Kubien

Hey Ernie.....

Steve Kubien

>Sounds like a good time was had by all. I've been to few get-togethers like that with other neanders/galoots and they have all been a blast! Thanks for the tour Ernie! I love the brick walls. They add a nice homely look to the joint.

Ernie, do you have enough handles for the drawers under the bench? Are you still looking for other donations? Let us know.

Steve Kubien

Ajax, Ontario

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#17

I need a few handles

Ernie Miller Topeka

>But give me a couple weeks to get the drawers finiahed and the ones I have are installed That way people know what drawers need pulls that way the aproperate ones get found.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#18

I knew you were strange

Todd O. Cronkhite Native of Maine

>and you confirnmed it when you said that you was going to spin counter-clockwise. ;~) Most folks go clockwise, but not our Ernie. Actually, we have a lot in common. Have you ever seen the picture of the 3 owls sitting on a tree branch, only one of them is hanging upside? That's me. Can't help it, just different by naturly :~)

Cool shop tour I like the bricks also.

When we do our Topeka midnight raid I call dibs on that Handcrank Drillpress. does anybody know if Ernie has dogs? Best bring some steaks just in case eh. Bob, your in charge of that.

Does sound like you yourself had a rockin good weekend and I'm glad for ya'!

Todd O.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#19

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Gerry Doll

>As a newbie, I'm torn between envy and fear as to where this slippery slope appears to lead.

Great photos, great shop.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#20

No steaks

Bob Hackett

>I`ll bring lobsters instead.If you take the bands off it keeps the dogs busy for a whole lot longer.I wonder what crabs are going for these days,could get out of this real cheap.

MB

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#21

Re: I knew you were strange

William Duffield on the Cohansey

>Ernie has a large, well-trained security force, that would as soon take the leg off a yowlah as look at him. Chief of Security is Zeus, a mutant runt poodle, with a really bad attitude.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#22

Re: Had a ROCKIN GOOD WEEKEND!!!!!

Ernie Miller Topeka

>congratulations I'm a nuby also! I never touched a tool untill about two years ago. when I built a power tool shop in the garage about a year ago I went hand tools. never been happier;<) slope is not steep or long your safe around here.

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#23

Re: Had a ROCKIN GOOD WEEKEND!!!!!

William Duffield on the Cohansey

>Surrounded by all that brick and mortar, and without windows, how do you encourage the spiders to come in and set up shop to help you control dust and shavings?

I've just got to have natural light, air and weather when I'm working with hand tools. OTOH, when I have to use the screamers, especially at night, I would prefer to minimize their assault on my neighbors' sensibilities. Also, since the powered machine is doing the work, and making most of the decisions, attitude and visibility are not so critical as they are with hand tools.

Maybe you should drag the forked tailed apprentices down into the dank, dark, oppresive dungeon and move the hand tool shop back into the real world? :^)

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#24

Jack Guzman from Maine

free yourself

Jack Guzman from Maine

>Ernie,

I totally agree with William on this. Besides, if you move your hand tools out into an open space you'll have more room to grow.My power tool area just keeps getting smaller as I learn proper use of the hand tools.

Just something to muse on as you sit in the reading room.---Jack

Re: Had a ROCKIN GOOD WEEKEND!!!!!

#25

Will have to swing south first

Bob Hackett

>and pick up a bucket of blue crabs from NJ.

Those things are,without a doubt,the meanest things on the planet.If they get out of the bucket while in the short bus I`m toast for sure.

The things we do for rust.

Mainely,Bob-Deputy Director for covert ops(Todd O would be the Director/Lusterous Potentate/Grand Heyhighrah)