Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Plane question

Posts

Plane question

#1

Plane question

David Miller from Iowa

>Just picked up an 8" manufactured coffin plane with the cutter bedding angle at 75-80 degrees. No cutter but still had the original wedge and I had another 2" wide, thick tapered one with chip breaker that fits perfectly. Except it won't work in the traditional way - chatters even on the lightest cut on pine. Was this a toothing plane? I suppose it could be a scraper if one rolled the burr backwards and pushed the plane backwards, but that doesn't seem right. What gives?

Re: Plane question

#2

Toothing plane

jim_reed@marietta

>My coffin toothing plane blade is bedded at an 86 degree angle. I think that is what you have.

Re: Plane question

#3

Re: Toothing plane

paul womack

>Wow - those old toothing planes were consistent at 86 degrees...

oldtools post

BugBear