Est. 1998 — 27 years of woodworking knowledge
Biscuit question
Howard
>I�m connecting the end of a 4 inch wide board to the side of a long board. The end of the 4 inch wide board and the side of the wide board are both curved and match. The radius of curvature is about 60 inches. Will I be able to make the correct depth cut in both pieces for the biscuit to fit properly?
Thanks
Howard
Biscuit Slot Depth
Steve Elliott
>Check your equipment to see if you can adjust the depth of the cut. Lamello machines are adjustable, but I'm not sure about other brands.
I'd guess that with a radius as large as 60 inches it will work, but if it doesn't you can shave a little off of the biscuits to make them fit.