Lee Valley, Mr. Lee and IWF Atlanta

Re: Lee Valley, Mr. Lee and IWF Atlanta

Rob Lee

>Hi Bill -

Will pass that along to the folks looking after the booth...

Cheers -

Rob

Will have the full plane line...

Rob Lee

>... all the spokeshaves, and the Large Shoulder plane too (it's suh-weeeeet!)

Cheers -

Rob

Is this ever gonna stop????

HC Sakman

>Collecting sports cards more appealing sometimes..... ;-) Heck no just kidding! Give us more steel please! ;-)

Good day Rob!

Chico...

Ok so what will..

Christopher Fitch @ Memphis

>the next batch of tools be Rob?

I have seen the picture of the concave spokeshave in Popular Woodworking. Is that one and the large shoulder plane the other?

:)

Re: Will have the full plane line...

Mike T

>So when can we expect to be able to order that sweet Large Shoulder plane? That's the one I've been waiting for.

Mike

Re: Will have the full plane line...

Rob Lee

>Hi Mike -

We intend to have them available end Aug, early September...

While we do have castings, and are making pre-production planes - we still have to make the fixtures and tooling for the mills...takes awhile!

Cheers -

Rob

Re: Ok so what will..

Rob Lee

>Both of those will be there.

It's really a question of what other new items we can bring...there's at least one really significant new item which should be there...but there's a lot of time between now and IWF...

Cheers -

Rob

Re: Will have the full plane line...

Steve Kubien

>I'm not sure who to be mad at...Bill Tindall for asking the question and causing Rob to tease us or Rob for actually doing the teasing!

This gets painful!

Steve Kubien

Ajax, Ontario

remove the _9 to email

Re: Will have the full plane line...

Alan Hamilton

>Rob,

Are there descriptions or photographs of these new enchanted tools of yours anywhere we can sneak a look at them?

I can feel my credit cards getting ready to burst into flames.

Alan

Re: Ok so what will..

Bill Houghton, Sebastopol, CA

>Is there a convex (measured along the edge of the iron, not front to back) shave on the development list too? That would be a nice lustworthy item.

Re: Ok so what will..

Rob Lee

>Bill -

All I can say is - sort of... we will make a tool to perform the function you describe.

Cheers -

Rob

Re: Will have the full plane line...

Rob Lee

>Nope - no photos yet...

That's a phase III tease - we're only at phase I.... :)

Really don't like to put out images too early, as the commercially available product may look a bit different...

Popular Woodworking did sneak a shot of the concave spokeshave in their last issue though...

Cheers -

Rob

*TRAVISHER*!? [drool...]

Greg B�tit, Vergennes, VT

>