Ever heard of this Diston?
Roy from Cincy
>Has anyone here ever heard of a Diston Powercraft 84-3900? What do you think of it?
Knowledge You Can Build On — Est. 1998
Ever heard of this Diston?
Roy from Cincy
>Has anyone here ever heard of a Diston Powercraft 84-3900? What do you think of it?
A Good Ski Boat.....
Todd Hughes
>"Powercraft 84-3900" well it does sound like one doesn't it?....don't think I have ever seen a saw marked like that but I am betting it is some P.O.C. saw made after Disston sold out to HK Porter and went down south around 1960 ....I have trained myself not to look at those type of saws.......Todd
Re: Ever heard of this Diston?
Roy from Cincy
>Here's a pic of the saw. I should have posted it with the first message. I'm trying to picture it with a barn painted on it with lots of little bluebonnets in the background. It's just not working for me.
Re: Ever heard of this Diston?
William R. Duffield on the Cohansey
>What that one needs is a laser engraved etch of a building by I. M. Pei.
Re: Ever heard of this Diston?
Christopher Fitch @ Memphis
>I saw that... wondered what the heck it is.
I mean it looks all sleek and modern and very appealing, at least to me, but what's the history?
That *looks* like an expensive saw...
but expensive != quality
Re: Ever heard of this Diston?
Roy from Cincy
>I agree, it looks neat. I can't figure out how the blade is attached to the handle. It looks all the world like it is milled out of one solid piece of metal. Could it be stamped and then polished?
Re: Ever heard of this Diston?
Jim in Burlington Ontario
>Is that blade stainless steel? Could it be the missing Norm Abrams saw he talked about in Measure twice cut once?
Re: Ever heard of this Diston?
Todd Hughes
>Looks about identical to a Disston D100 a futuristic looking saw that had a lightweight aluminum handle and was made from about 1960-66. Maybe this saw if the number is different was the same model but just made later after Disston sold out?[speculating now]
Just by chance I had the occasion to use one of these saws last week. While back a friend gave me a pretty clean and sharp D100 along with a D8 thumbhole rip that she had bought for me because as she put it, they looked "Expensive and Rare" I don't think either is true judging by the many I have seen and the few i have sold on ebay so i thanked her and tossed them in the back of the truck . Last week i was working on my front fence and cutting the boards while supporting them in the bed of the truck. The D23 I was using was getting pretty dull,[was the saw I used to cut all the fence boards as well as the siding I put up] so when I saw the D100 laying there figured I would use it as it was sharp even if a little rusty by now. Cut the wood fine but I found the handle very uncomfortable to hold and after a few cuts decided to walk down to my shop and dig around to find a sharp saw with a more comfortable handle to use [picked an old No.12]....well guess I'm not giving it a good review but it is kind of neat looking, ....in sort of a speed boat way....Todd , who should go out and get them out of the bed of the truck after it stops raining
Measure twice, cut once
Roy from Cincy
>I have a book called Measure Twice, Cut Once, but it is way beyond the Norm.
Re: Ever heard of this Diston?
Roy from Cincy
>Tod,
You're right. After you gave me the clue on the D-100, I searched up the attached pic, which shows the aluminum handle in contrast to the steel blade. I still can't figure out how they attach the handle to the blade with no nuts. But I think I'll let someone else have the Disston Powrkraft-84-whatever.
Re: Ever heard of this Diston?
Tom MacGregor
>Paint the wood bright red, title it a "Rare Buck Rogers Handsaw" and sell it on eBay with a $49.99 reserve.
Re: Ever heard of this Diston?
Cooper Suter
>I think my examples of these saws have screws from one side that attach the handle.
This may sound to obvious, but whats on the other side of the handle?
I'm remembering flush philip heads.
I haven't looked on ebay what these are bringing, but you'll see them at tool shows w/a $50-$100 price tag if in decent condition, can't say if anyones paying that though.
I hear these saws referred to as "Avanti's", like the cars.
Coop.